User manual SMEG CG92N9

[. . . ] INSTRUCTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ENVIRONMENTAL CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. 1 Our environmental care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To prevent hazardous overheating, the appliance's lid (where present) must always be raised when using the oven. Heat the empty appliance to the maximum temperature in order to remove any manufacturing residues which could affect the food with unpleasant odours. 19 Instructions for the user 7. 8 Electronic programmer (on some models only) LIST OF FUNCTIONS Timer key End of cooking key Cooking duration key Value decrease key Value increase key 7. 8. 1 Setting the time On the first use, or after a power failure, will be flashing on the oven's display. Press the or : this will and keys together, and at the same time press the value adjustment keys increase or decrease the setting by one minute for each pressure. Press either of the value modification keys to display the current time. Before each programmer setting, activate the required function and temperature. 7. 8. 2 Semi-automatic cooking Semi-automatic cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user. Press the key and the display will light up showing the figures or to set the cooking duration. ; keep it pressed, and at the same time use the keys When is released, the count of the programmed cooking duration will start and the display will show and A (to indicate that a programmed cooking operation has been the current time together with set). 7. 8. 3 Automatic cooking This function switches the oven on and off in fully automatic mode. Press the key and the display will light up showing the figures or ; keep it pressed, and at the same time use the value modification keys Press the to set the cooking duration. key and the display will show the sum of the current time plus the cooking duration: keep or to adjust the end of cooking it pressed, and at the same time use the value modification keys time. When the key is released, the programmed count will start and the display will show the current time . together with the symbols A and After making the setting, press the key to view the remaining cooking time; press the key to view the cooking end time. The logic prevents the setting of incompatible values (e. g. the programmer will not accept a cooking end time with a duration which is too long for its value). 20 Instructions for the user 7. 8. 4 End of cooking At the end of the cooking time the oven will switch off automatically and simultaneously a buzzer will start to sound intermittently. After the buzzer has been deactivated, the display will return to show the current time together with the 7. 8. 5 Timer The programmer can also be used as an ordinary timer. Press the key and the display will show the figures or ; keep pressed and simultaneously symbol to indicate that the oven has returned to manual use mode. press the value modification keys . When the key is released the count will start and the . display will show the current time and the symbol After the setting, to display the time left press the key. In timer mode, the oven operation will not be cut out at the end of the set time. 7. 8. 6 Adjusting the buzzer volume The buzzer volume can be varied (3 settings) while it is in operation by pressing 7. 8. 7 Stopping the buzzer The buzzer stops automatically after about seven minutes. It can be deactivated manually by pressing keys and together. To switch off the appliance, return all the knobs to the 0 setting. 7. 8. 8 Deleting the set data Having programmed a semi-automatic or automatic cooking operation, this programming can be cancelled by holding down the key for the function which has just been programmed and simultaneously pressing or until appears on the display. The programmer will interpret the cancellation of the program as terminating the cooking operation. [. . . ] The socket must be accessible after the appliance has been built in. Should the earthing wire need replacing it must be longer than the current conduction wires so that, if the plug is torn off the power cable, it is the last to be detached. Avoid use of adapters and shunts as these could cause overheating and risk of burns. If a fixed connection is being used, fit the power line with an omnipolar circuit breaker with a contact opening gap equal to or greater than 3 mm, in an easily accessible position close to the appliance. The manufacturer declines all responsibility for damage to persons or things caused by nonobservance of the above prescriptions or by interference with any part of the appliance. APPLIANCE TYPE (CM) POSSIBLE CONNECTION TYPES 380 415 V 2N~ 4-pole CABLE TYPE (if not present) 4 x 2. 5 mm² H05V2V2-F 90 220 90 - 240 V 1N~ 3-pole 3 x 6 mm² H05V2V2-F · · · · Use H05V2V2-F cables resistant to at least 90°C. The values indicated above refer to the cross-section of the internal conductor. [. . . ]