User manual SMEG CLPI460N

[. . . ] Contents 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 2. 5 How to read the user manual This user manual Appliance purpose General safety instructions Manufacturer liability Identification plate Disposal General Description Cooking hob Control panel Other parts Available accessories Instructions First use Using the accessories Using the hob Using the storage compartment Using the oven Cooking advice Instructions Cleaning the appliance Removing the door Cleaning the door glazing Removing the internal glass panels Cleaning the inside of the oven Pyrolysis: automatic oven cleaning Extraordinary maintenance 4 4 4 4 5 5 5 2 Description 7 7 8 12 14 14 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 4. 8 16 16 18 18 21 24 25 36 4 Cleaning and maintenance 39 39 39 40 40 40 42 43 45 5 Installation 5. 1 Electrical connection 5. 2 Positioning 47 47 48 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www. smeg. com 3 EN 1 Instructions 4 Instructions 1 Instructions 1. 1 How to read the user manual This user manual uses the following reading conventions: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its accessories. Use Information on the use of the appliance and its accessories, cooking advice. [. . . ] Modifying the cooking function does not stop the countdown previously set Programmed cooking Programmed cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user. 1. Select a cooking function as described in “Selecting a cooking function”. Press the temperature selection knob twice. The display will show the digits and symbol flashing. Turn the knob to the right or to the left to set the minutes of cooking from 00:01 to 12:59. A few seconds after selecting the required time, symbol will stop flashing and from that point it is possible to press the temperature selection knob to set the cooking end time. For safety reasons, when setting programmed cooking you should first program a cooking time and then set the cooking end time. It is not possible to set the cooking end time alone without setting its duration. 28 Use knob to the right or to the left to change the set time. Press the temperature selection knob again, symbol will switch off, symbol will start flashing and the cooking end time will be displayed. The cooking end time can be brought forward or put back by turning the knob to the right or to the left. A few seconds after the last change, symbols and will appear (fixed) and programmed cooking will restart with the new settings. Once cooking has been programmed, before it starts, the function or recipe symbol will remain on, as will the symbols , . 4. will appear together with the cooking end time. To alter the value, turn the knob right or left. A few seconds after the last knob is pressed, symbols and will stop flashing and from that point the appliance will wait for the cooking start time. 5. Cooking will be interrupted and a buzzer will sound which can be deactivated by pressing the temperature selection knob. You can also set an additional cooking time in programmed mode by turning the temperature selection knob. At the end of cooking, the temperature selection knob can be turned to stop the buzzer and set another cooking time. To extend the cooking time in manual mode, press the temperature selection knob. The appliance will restart its normal operation with the previously selected cooking settings. To switch the appliance completely off, hold the On/off knob down for 2 seconds. When symbols and are fixed, press the temperature selection knob. Symbol will start flashing; turn the 29 EN Use Selecting a recipe The appliance is equipped with preset recipes and 3 free recipes. [. . . ] General information Check the grid characteristics against the data indicated on the plate. The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. Do not remove this plate for any reason. Perform the ground connection using a wire that is 20 mm longer than the other wires. The appliance can work in the following modes: • 220-240 V 1N~ Use a 3 x 4 mm² three-core cable. [. . . ]