User manual SMEG CS120NL-7

[. . . ] ALSO KEEP THE SERIES OF NOZZLES SUPPLIED. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND CONFORMS TO CURRENT REGULATIONS IN FORCE. THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING FUNCTIONS: COOKING AND HEATING-UP OF FOOD. [. . . ] Symbol will flash on the display together with the current time, with internal segments illuminated to show the end of cooking time. Use keys and to set the cooking end time. 5 seconds after the last key is pressed, the display will show the current time and the cooking start and end times, which will be represented by the illuminated inside segments. The display segments will be constantly illuminated as long as the current time is not the same as the cooking start time; as soon as the current time reaches the set starting time, all the inside segments will start to flash, indicating that the oven has started cooking. At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the dial will flash. To delete the entire set program, hold down the central key for 2 seconds; if cooking has already started, the oven will have to be switched off manually. Here we can see a programming example: the current time is 7:06 and cooking is programmed to start at 8. 00 and end at 9. 00. At 8 o'clock the inside segments between 8 and 9 will start to flash, while the hours hand will 1 remain still. Warning: for the oven to start cooking operations after the programming procedures just described, the thermostat and functions switch knob must be correctly set on the desired temperature and function. 5. 2. 4 Display brightness reduction To reduce the energy consumption in stand-by, key can be pressed to reduce the display brightness. To restore the normal brightness, press again. 60 Instructions for the user 6. Fans cause a steady outflow of air from the rear top skirt board on the rear of the cooking hob, which may continue for a brief period of time even after the oven has been turned off. This ventilation system ensures that the temperatures on the outside of the appliance meet the standards required by the current regulations. 63 Instructions for the user 7. 4 Storage compartment The storage compartment is in the bottom of the cooker, underneath the ovens. To open it, pull on the top of the door. Never use it to store flammable materials such as rags, paper, etc. ; it is intended to take the appliance's metal accessories only. Never open the storage compartment when the oven is on and still hot. The temperature inside may be very high. 64 Instructions for the user 8. AVAILABLE ACCESSORIES The oven features 4 runners for positioning trays and racks at different heights. Oven rack: for cooking food on plates, small cakes or roasts or foods requiring light grilling. Tray rack: for placing on top of a tray for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the rack above. Baking tray: useful for cooking cakes, pizza and confectionery. Rotisserie rod: useful for cooking chicken, sausages and all foods which require uniform cooking over their entire surface. Main oven rotisserie frame: to be fitted into the holes provided in the oven tray. Spit Frame: to be inserted in the guides of the auxiliary oven before using the spit. Accessories on Request The bottom skirting and self-cleaning oven panels can be requested from Authorised Service Centres. 65 Instructions for the user Two optional accessories are also available from Authorised Service Centres: Griddle plate on gas burner: this optional plate is for installation on the hob instead of the right-hand pan stand (fish burner). [. . . ] There is no special order for removal of the left-hand pan stands. Clean the pan stands in warm water and non-abrasive detergent, taking care to remove all incrustations. Replace, fitting first the outside pan stand then the griddle. 10. 2. 4 Burner caps, flame-spreader crowns and burners The burner caps, flame-spreader crowns and burners can be removed for easier cleaning. Remove the pan stands and wash them in warm water with a nonabrasive detergent, taking care to remove all encrustations, and wait until they are completely dry. [. . . ]