User manual SMEG DOSF634X

[. . . ] INSTRUCTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ENVIRONMENTAL RESPONSIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 GET TO KNOW YOUR OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It only warns the user that the preset number of minutes have passed. • Press . The display will show the digits symbol is fixed; or and the symbol will flash while the • • • Press the value modification buttons to increase or decrease the setting by one minute for each pressure until reaching the desired time; Wait about 5 seconds without pressing any buttons to exit the timer setting mode; The current time and the hour and minute digits; and symbols will appear between the • • To view the remaining time, press the current time view; and wait about 5 seconds to return to . To silence the buzzer at the end of the time, press If the user wants to end cooking at the end of the time, the thermostat and oven function knobs must be controlled manually. A time longer than 4 hours cannot be set. If is pressed accidentally and no time setting is desired, press to cancel the settings. 65 Instructions for the user 7. 2. 3 Cooking duration This function allows a cooking operation to be started and then stopped after a specific length of time set by the user. To set the cooking duration, proceed as follows: • Rotate the oven thermostat knob to the desired temperature • Rotate the oven function knob to the desired function • • • • Press . On the display the digits or will be shown; to increase or decrease the Press the value modification buttons setting by one minute for each pressure until reaching the desired time; Wait about 5 seconds without pushing any buttons to start the function; The current time, the A symbol and the display; symbol will be shown on the • • Press to view the remaining time; At the end of the time the timer will switch off the oven heating elements and the buzzer will sound. The A symbol will flash and the disappear; symbol will • To silence the buzzer, press and proceed with manually switching off the oven if a cooking operation is in progress. Warning: it is not possible to set cooking durations of more than 10 hours. The set programming can be reset by pressing . By doing this the set duration will be cancelled and the oven must be turned off manually if a cooking operation is in progress. 66 Instructions for the user 7. 2. 4 End of cooking This function allows, as well as setting a cooking duration, a cooking end time to be set (with a maximum delay of 24 hours in relation to the current time). • • • • Rotate the oven thermostat knob to the desired temperature Rotate the oven function knob to the desired function Set the cooking duration as described in the previous point ("Cooking duration"); Press and the sum of the current time plus the preset cooking time will appear on the display. • • • • • • • Press the value modification buttons or to increase or decrease the setting by one minute for each pressure until reaching the desired time; Wait about 5 seconds without pushing any buttons to start the function; The current time and the A symbol will be shown on the display; Press Press to view the remaining time; to view the cooking end time; At the end of the cooking operation the timer will deactivate the oven heating elements and the buzzer will sound. The numbers on the dial will flash; To silence the buzzer at the end of the time, press and proceed with manually switching off the oven if a cooking operation is in progress. The set programming can be reset by pressing . By doing this the set duration will be cancelled and the oven must be turned off manually if a cooking operation is in progress. 7. 2. 5 Modifying the set data The set cooking data can be modified at any time by pressing the function button and then pressing the buttons or to change the value. 67 Instructions for the user 8. USING THE OVEN 8. 1 Before using the appliance Remove any labels (apart from the technical data plate) from trays, dripping pans and the cooking compartment. Remove any protective film from the outside or inside of the appliance, including from accessories such as trays, dripping pans, the pizza plate or the base cover. Before using the appliance for the first time, remove all accessories from the oven compartment and wash them as indicated in “10. Heat the empty appliance to the maximum temperature in order to remove any manufacturing residues which could affect the food with unpleasant odours. 8. 2 General Description 8. 2. 1 Cooling system The appliance is equipped with a cooling system which comes into operation as soon as a cooking function starts. The fan causes a steady outflow of air from above the door which may continue for a brief period of time even after the oven has been turned off. 68 Instructions for the user 8. 2. 2 Oven inside lights The oven lights come on when the door is opened or any function is selected. If the oven light fails, replace it as described in “11. 1 Replacing the light bulb”. 8. 2. 3 Oven runners The oven features 5 runners and 3 shelves for positioning trays and racks at different heights. The insertion heights are numbered from the bottom upwards (see the example in the figure). 8. 2. 4 Using the rack The racks are equipped with a mechanical safety lock which prevents them from being taken out accidentally. To insert the rack correctly, check that the lock is facing downwards (as shown in the figure). To take it out, lift the front edge of the rack slightly while sliding it out on the side runners. [. . . ] Warning: before removing the glass panels, make sure that at least one of the door’s hinges has been locked in the open position as described in “11. 2 Removing the door”. This operation may have to be repeated during the glass removal process if the door is accidentally freed. 83 Instructions for the user Removing the internal glass panel: to disconnect the glass securing pins: • Lift the rear part following the motions indicated (1). • Lift the front part following the motions indicated (2) • Remove the middle pane by lifting it upwards; Cleaning: • Clean the external glass panel and the panels which were previously removed. In the case of stubborn dirt, wash with a damp sponge and neutral detergent; Replacing the glass panels: • Replace the panels in the reverse of the order in which they were removed; • Centre and insert the 4 pins secured to the internal pane into their seats on the oven door using light pressure. 84 Instructions for the installer 12. INSTALLING THE APPLIANCE 12. 1 Electrical connection The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. [. . . ]