User manual SMEG DUSF44X

[. . . ] Contents 1 Instructions 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 How to read the user manual This user manual Appliance purpose General safety instructions Manufacturer liability Identification plate Disposal General Description Control panel Other parts Available accessories Instructions First use Using the accessories Using the oven Cooking advice Programmer clock Instructions Cleaning the surfaces Ordinary daily cleaning Food stains or residues Removing the door Cleaning the door glazing Removing the internal glass panes Cleaning the inside of the oven Extraordinary maintenance 30 30 30 30 30 31 31 31 2 Description 32 32 33 33 34 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 4. 8 4. 9 36 36 36 37 38 39 41 4 Cleaning and maintenance 46 46 46 46 46 46 47 47 48 49 5 Installation 5. 1 Electrical connection 5. 2 Cable replacement 5. 3 Positioning 51 51 52 52 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www. smeg. com 29 EN Instructions 1 Instructions 1. 1 How to read the user manual This user manual uses the following reading conventions: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its accessories. Use Information on the use of the appliance and its accessories, cooking advice. [. . . ] The dot between the hours and the minutes stops flashing. 1 Minute minder timer key 2 Cooking duration key 3 End of cooking key 4 Value decrease key 5 Value increase key The programmer clock controls exclusively the main oven and has not any control on the other ovens. The symbol on the display indicates that the appliance is ready to start cooking. Timed cooking Timed cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user. After selecting a cooking function and temperature, press key . The display will shows the digits and the symbol displayed between the hours and the minutes. Use the key or to set the required minutes. 5 seconds without pressing any key in order for the function to activate. The current time and the symbols and will appear on the display. 41 EN Use 4. At the end of cooking the heating elements will be deactivated. On the display, symbol turns off, symbol flashes and the buzzer sounds. To turn off the buzzer just press any key of the programmer clock. Press keys and at the same time to reset the programmer clock. It is not possible to set a cooking time of more than 10 hours. After the setting, to display the cooking time left press the key. To reset the set program, press keys and at the same time and switch off the oven manually. Programmed cooking Programmed cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user. Set the cooking time as described in the previous point “Timed cooking”. The sum of the current time plus the pre-set cooking duration will appear on the display. Use the or key to set the required minutes. 5 seconds without pressing any key in order for the function to activate. The current time and the 42 symbols and will appear on the display. [. . . ] • Disconnect the main power supply. General information Check the grid characteristics against the data indicated on the plate. The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. Do not remove this plate for any reason. [. . . ]