User manual SMEG ET12250EU

[. . . ] DE GB FR IT NL ES PT GR Montageanweisung Installation Instructions Manuel de montage Istruzione per l'installazione Installatievoorschrift Instrucciones de Montaje Instruções de montagem Oäçãßåò åãêáôÜóôáóçò bitte aufbewahren please keep à garder soigneusement si prega di conservare 801 146 00 03/00 goed bewaren por favor, guardar por favor, guardar Íá öõëÜóóåôáé HU PL RU TR Szerelési Útmutató Instrukcja monta¿u Ÿc¹py®ýåø ÿo ¯o¸¹a²y Montaj Talimatlar bitte aufbewahren proszê zachowaæ ¥o²aæy¼c¹a, coxpa¸å¹e Lütfen saklaynz 1. 2. Please detach and retain 801 146 00 03/00 GB Please observe: J Connection to the electricity supply must only be carried out by a qualified electrician. [. . . ] J In accordance with heating testing standards, the appliance corresponds to Safety Class Y". Only one side of the appliance may be installed next to a high room wall or a high sided unit. J Worktop: The worktop must be 19-40 mm in thickness. They must be horizontal, level, and tight to the wall in order to prevent the ingress of split liquids. J Fitted furniture must be heat resistant up to 90 ºC. This applies especially to veneer, edge bands, plastic surfaces, adhesives and varnishes. Important information: 1. Preparing the furniture Before installing appliances, ensure that the furniture and worktop have all the required cutouts. Remove sawdust, otherwise electrical components may malfunction. The gap between the sides of a cutout and a left or right wall must be at least 120 mm. [. . . ] Remove any protruding sealing material using a suitable tool. 2. Installing and connecting the hob Important information when removing the hob: Ensure that the no voltage is applied to the appliance. [. . . ]