User manual SMEG JLRCSS104

[. . . ] JLRCSS104 JLRCBK105 Range cooker Instruction manual Important safety information Thank you for purchasing this appliance. This manual is an integral part of the appliance and therefore must be kept in its entirety and in an accessible place for the whole working life of the cooker. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. Installation must be carried out by qualified personnel in accordance with the regulations in force. [. . . ] 1 Press the "end time" key, the display lights up, showing the current time. 2 Use the or keys to set the desired cooking end time. The `A' simbol will appear on the display, and the current clock time will be shown. After set-up, to see the cooking end time, press the "end time" key. will appear on the display, and the current clock time will be shown. 5 Select the oven function and temperature required for your dish. After set-up, to see the cooking time remaining, press the "cooking period" key; to see the end of cooking time press the "end time" key. At the end of automatic cooking When cooking is over, the oven will automatically switch off and, at the same time, an intermittent alarm will sound. Press the "minute timer" key to silence it. The alarm mode switches off automatically after seven minutes. They can be manually deactivated by pressing the "cooking period" key and "end time" key together. To switch off the appliance, rotate all the knobs to `0' position. To set the oven to start and finish at preset times: Use this function to start and finish cooking automatically. For example, the recipe may require 50 minutes cooking time and it will be ready at 20:00. In this case the programmer will calculate the start time to be at 19:10 and will start and end automatically. 1 Press the "cooking period" key, the display lights up, showing 00:00. 2 Use the or keys to set the desired cooking time. The `A' simbol will appear on the display, and the current clock time will be shown. 3 Select the time that the oven has to be switched off. Press the "end time" key, the display lights up, showing the current time. 4 Use the or keys to set the desired cooking end time. The `A' simbol 15 Erase of set data Once the programmer has been set, press the key of the function to be cancelled. Next press the key until the display shown 00:00. Time cancellation will be considered as end of cooking time by the programmer. Adjusting alarm volume The acoustic alarm has three different settings. These can be operated, while the alarm is sounding , by pressing the key. Use of the hob Caution! [. . . ] The cooker hob is preset for natural gas G20 (2H) at a pressure of 20 mbar. In the case of operation with other types of gas the burner nozzles must be changed and the minimum flame adjusted on the gas taps. 27 Burner and nozzle characteristics table Rated heating capacity (kW) Nozzle diameter 1/100 mm Auxiliary Semi rapid Rapid Triple crown 1. 0 1. 8 3. 0 3. 9 Rated heating capacity (kW) 1. 0 1. 75 3. 0 3. 9 50 65 85 100 Burner LPG ­ G30/G31 28/37 mbar Reduced flowrate (W) 400 500 800 1500 Flowrate g/h G30 73 127 217 233 Flowrate g/h G31 71 125 214 229 Burner NATURAL GAS ­ G20 20 mbar Nozzle diameter 1/100 mm Reduced Flowrate (W) 400 500 800 1500 Auxiliary Semi rapid Rapid Triple crown 72 97 115 135 28 Levelling the appliance Rear top skirt Caution!Always install the rear top skirt which is an integral part of the appliance. After making the electrical and/or gas connections, level the appliance on the floor by means of its four adjustable feet. First insert the front feet and then the rear feet. [. . . ]