User manual SMEG K10X

[. . . ] 7 4. 1 Wall fixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. 2 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4. 3 Room ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4. 4 Combustion gas discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Verify that all the following conditions are met: · the hose is fixed to the hose connection with safety clamps; · no part of the hose is in contact with the hot walls (max. 50 °C); · the hose is not under traction or tension and has no tight curves or twists; · the hose is not in contact with sharp objects or sharp corners; · if the hose is not perfectly airtight and leaks gas, do not try and repair it: replace it with a new hose; · verify that the hose is not beyond its life cycle (serigraphed on the hose itself). CONNECTION USING RUBBER HOSES COMPLYING WITH THE CURRENT REGULATIONS IS ONLY PERMITTED IF THE HOSE CAN BE INSPECTED ALONG ITS ENTIRE LENGTH. 4. 5. 1 Connecting to natural and LPG gas FOR THE GAS CONNECTION, SEE THE TYPE OF APPLIANCE SUPPLY TUBE · Free hexagonal connector Make the connection to the appliance using flexible bayonet style hose in accordance to B. S. The hose connection at the rear of the appliance has a ½" BSP internal thread. Please use seal C between the flexible connection L and the appliance supply tube B. When making the connection, make sure that no stress of any kind is applied to the cooker and that the hose does not touch any sharp edges. If connecting to LPG the bayonet hose must have red bands on it. · Smooth welded connector Make the connection to the appliance using a flexible bayonet style hose in accordance to B. S. The hose connection at the rear of the appliance has a ½" BSP internal thread. Always apply a suitable sealing substance (such as Teflon tape) between the flexible connection L and the appliance supply tube B. When making the connection, make sure that no stress of any kind is applied to the cooker and that the hose does not touch any sharp edges. After an interruption in the electricity supply, the display flashes at regular intervals, showing . For setting instructions, see point "14. ELECTRONIC PROGRAMMER". 13 Instructions for the User 9. DESCRIPTION OF THE CONTROLS ON THE FRONT PANEL All the control and indicator lights are clearly in view on the front panel. The symbols used are described in the table below. COOKING HOB CONTROLS FRONT LEFT-HAND BURNER REAR LEFT-HAND BURNER REAR CENTRAL BURNER ELECTRONIC PROGRAMMER Description of the controls: TIMER BUTTON END OF COOKING BUTTON COOKING DURATION BUTTON VALUE DECREASE BUTTON VALUE INCREASE BUTTON FRONT CENTRAL BURNER REAR RIGHT-HAND BURNER FRONT RIGHT-HAND BURNER Before using the functions available with the electronic programmer see chapter "14. OVEN CONTROLS AUXILIARY OVEN VARIABLE GRILL THERMOSTAT CONTROL STATIC OVEN THERMOSTAT CONTROL COOKING HOB ELECTRIC PLATE ELECTRIC PLATE CONTROL MULTIFUNCTION FUNCTION CONTROL MULTIFUNCTION THERMOSTAT CONTROL OVEN OVEN Before using the oven/main oven, check that the display is showing the symbol ELECTRONIC PROGRAMMER". ; see point "14. 14 Instructions for the User HOB BURNERS CONTROL KNOB To light the flame, press the knob and turn it counterclockwise to the minimum flame symbol . To adjust the flame, turn the knob to the zone between the maximum ( ) and the minimum ( ) settings. To turn off the burner, turn the knob to the position. AUXILIARY OVEN VARIABLE GRILL THERMOSTAT KNOB By turning the variable grill knob clockwise you can switch on the oven inside light or start grill operation. The grill element heats up the oven with a temperature indicatively ranging from a minimum of 50°C and a maximum of 245°C. The indicator light comes on to indicate that the oven is heating up. [. . . ] When the button is released the programmed count will start and the display will show the current time and the symbol. After making the setting, to display the time remaining press the button . In timer mode, the system will not cut out operation of the oven at the end of the set time. 14. 6 Adjusting the buzzer volume The buzzer has 3 different volume settings. To change the setting, press the button at the end of the timer function with the buzzer in operation. 14. 7 Stopping the buzzer The buzzer stops automatically after seven minutes. [. . . ]