User manual SMEG KI90C-1

[. . . ] The kitchen must have an opening communicating directly with the open air in order to guarantee the entry of clean air. USE The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells. Never use the hood for purposes other than for which it has been designed. [. . . ] To install a 120 mm air exhaust connection, insert the reducer flange 9 on the hood body outlet. Fix the pipe using the pipe clamps 25 (not provided). Remove any activated charcoal filters. 150 120 25 25 9 EN 1 17 7 RECIRCULATION VERSION AIR OUTLET Push fit connection 15 onto the hood body outlet. Insert the connection extension pieces laterally 14. 1 in connection 15. Make sure that the outlet of the extension pieces 14. 1 is horizontally and vertically aligned with the chimney outlets. If this is not the case, adjust the position by either reversing the connection extension pieces 14. 1 and then reassemble as described previously. Ensure that the activated charcoal filters have been inserted. 15 14. 1 Flue assembly - Mounting the hood body Position the upper chimney section and fix the upper part to the frame using the 2 screws 12c (2, 9 x 6, 5) provided. Similarly, position the lower chimney section and fix the lower part to the frame using the 2 screws 12c (2, 9 x 6, 5) provided. Recirculation version Make sure that the outlet of the extension pieces 14. 1 is horizontally and vertically aligned with the chimney outlets. Otherwise, remove the lower chimney and adjust the position by inverting the extension pieces for air outlet connection 14. 1 or by cutting the hood body extension piece 14 (if any) along one of the chases destined to the predetermined extension lengths. Replace then the elements as earlier described. Fit the directional grids 8a - 8b in their housings making sure that the directional symbols are towards the top. Also make sure that they are correctly inserted in the connection extension pieces 14. 1. Before fixing the hood canopy to the frame: Screw the 2 screws 12f half way into the holes provided in the sides of the bottom of the frame. [. . . ] When refitting the filters, make sure that the handle is visible on the outside. Activated charcoal filter (Recirculation version) REPLACING THE ACTIVATED CHARCOAL FILTER The filter is not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently for particularly heavy usage. Remove the saturated activated carbon filter by releasing the fixing hooks. [. . . ]