Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SMEG KSET66D. We hope that this SMEG KSET66D user guide will be useful to you.
Lastmanuals help download the user guide SMEG KSET66D.
Detailed instructions for use are in the User's Guide.
[. . . ] The installion (or removal) steps are identical for hoods with either 1 or 2 motors: a. Request a charcoal filter from the retailer, specifying the model and type of hood (1 filter for a hood with one motor and 2 filters for a hood with 2 motors). Some charcoal filters come covered with a plastic film to protect their filtering properties. [. . . ] Connect the electrical plug, where provided, to the an easily accessible outlet in conformity with local standards in force. Where an electrical plug is not provided (for direct connection to electrical network) place a standards approved bipolar switch with an aperture distance of not less than 3mm (accessible) from the contacts. Drill holes in the bottom of the cabinet so that they correspond with the holes (F) in the hood used to fasten it to the cabinet. Use the drilling template if it has been provided (the edge with the arrow should correspond with the back edge of the cabinet - Fig. Drill a hole on the back and in the top of the cabinet for the ventilation duct (a good rule of thumb is to make the diameter of the hole 15 mm larger than that of the duct used). Insert the C screws supplied with the hood into the F holes and tighten the hood to the cabinet (Fig. Assembly using side bracket (if supplied) The hood can also be mounted by means of two brackets supplied with the hood. Drill two holes Ø 2 mm on the two sides of the cupboard from the inside using the template Q supplied. Fix the two brackets T to the upper side of the hood using screws V 4, 2 x 35 (the position of the brackets can be adjusted in width according to the thickness of the cupboard panels). Fix the hood, through the brackets already mounted, on the inside of the cupboard using screws Z 3, 5 x 13 (two each side). Adjusting the Pull-Out Drawer The hood can be installed beneath cabinets with varying depths. Adjustments for opening and closing the drawer can be made based on your specific needs. Using the hood The hood is provided with several speeds. For the best performance, we recommend using the low speeds in normal conditions and the high speeds when strong odour and vapour concentrations are present. [. . . ] Before calling for customer service because the lighting system does not work, make sure that the lamps are screwed in tightly. cleaning The cooker hood should be cleaned regularly internally and externally. For cleaning use a cloth moistened with denatured alcohol or neutral liquid detergents. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SMEG KSET66D
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SMEG KSET66D will begin.
