User manual SMEG KTS75AC

[. . . ] Libretto d'istruzioni Instruction manual Mode d'emploi Gebrauchsanweisung Manual de instrucciones Instruções de instala ção Gebruiksaanwijzingen Bruksanvisning KTS75/KTS75C Installation of glass panels Take the two 200x750 hood glass panels out of the box. [. . . ] Let the glass panel slide along the pin guides (Fig. 5 and Fig. 3. 2) Fig. 2 Fig. 5 Fig. 3. 1 - Initial position (Pins high) Glass removal To remove the glass panels, follow the procedure in the reverse order. Fig. 3 Fig. 3. 2 - Final position (Pins down) EN 01 EN 02 Removal of filter panels To remove the filters, use the key included in the supply (Fig. 5). Turn the key downwards and pull (Fig. 8). Fig. 8 Fig. 5 Place the key as shown in Fig. 6. Pull the panels up to remove them (Fig. 9). Fig. 6 Fig. 9 NB. : To remove the upper panel pair, remove the glass panels as described on page 2 . Insert the key prongs in the holes on the upper central part of the panel (Fig. 7) . Fig. 7 EN 03 EN 04 Installation of the filter panels Adjustment of glass-closed position Fig. 10 Fig. 13 Take the panels close to the hood. Insert the filter pins in the seats as shown in Fig. 10 Adjust the glass closed position after installing the hood. [. . . ] Use a size-3 Allen key for the adjustment (Fig. 13). Fig. 12 EN 05 EN 06 Installation instructions Height of the holes for the bracket Reference height for the center of the exhaust hole Level of the hob Fig. 14 Fig. 15 a) Fix the hood in the center over the hob; b) Maintain the distances shown at fig. [. . . ]