User manual SMEG LB126

[. . . ] Instructions for Use Washing machine Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. [. . . ] In case you wish to change or suspend the delayed start after starting the machine with the START knob (F), you may do so by pressing the MENU knob (B). The delayed start appears; using the SELECTION button (C) reset the delay period. End of program (certain models only) Caution: prior this setting check whether the current time of day is set correctly (see section Special functions). Set the time you want the program to end the washing procedure. The machine will automatically calculate the starting time, depending on the selected program. End of washing may be delayed for maximum 20 hours, in 30 minute intervals for the first two hour delay, and in hourly intervals for the rest. Function is set by pressing or keeping pressed the 17 155620 SELECTION knob (C) until the required time to end the washing appears on display. Caution: If Clean water sensor is engaged, the program may last longer for extra rinsing time. In case you wish to change or suspend the end of washing time after starting the machine with the START knob (F), you may do so by pressing the MENU knob. The end of washing time appears; using the SELECTION button (C) reset the selected time. Sound signal Sound signal beeps when a knob is pressed (function selection), and it also signals the end of washing program and reporting failures. In default setting the sound signal is on. You may select to switch the sound signal off, or increase volume. Legend: sound signal off normal sound signal setting increased volume setting If you switch the sound signal off the display indicates relevant symbol . Child protection Operation of the washer may be protected against accidental changes of programs or functions. The function is activated by pressing the START/PAUSE button (F). Temporary disengagement of the function (during the operation): - Keep the MENU knob (B) pressed for 4 seconds, relevant symbol flashes on the display. - Stop the program by pressing the START/PAUSE knob (F). - Press the START/PAUSE button (F) and reactivate the child lock. In case you fail press any knob within 15 seconds, the protection is automatically reactivated. 18 155620 Permanent disengagement of the function: a. ) During the operation: - Keep the MENU knob (B) pressed for 4 seconds. - Stop the program by pressing the START/PAUSE knob (F). - Using the MENU knob (B) move to child lock option. [. . . ] · Use liquid detergents which do not contain zeolites. · Try removing the residues with the brush. · Use program for heavily soiled laundry, or activate soaking function. You used liquid detergent or detergent for colored laundry which does not contain whitener. It is not the consequence of bad rinsing, but because of neo-phosphate detergents containing non soluble components (zeolites) for water softening. [. . . ]