User manual SMEG LB127X-1

[. . . ] Instructions for Use Washing machine Thank you for your confidence in purchasing our washing machine, and congratulations on the excellent choice. Your new washing machine meets the requirements of modern treatment of laundry. It is rational in the consumption of energy, water and washing agents. Our appliances are friendly to the environment. [. . . ] End of washing may be delayed for maximum 20 hours, in 30 minute intervals for the first two hour delay, and in hourly intervals for the rest. Function is set by pressing or keeping pressed the SELECTION knob (C) until the required time to end the washing appears on display. 13 242221 Caution: If Clean water sensor is engaged, the program may last longer for extra rinsing time. In case you wish to change or suspend the end of washing time after starting the machine with the START knob (F), you may do so by pressing the MENU knob. The end of washing time appears; using the SELECTION button (C) reset the selected time. Sound signal Sound signal beeps when a knob is pressed (function selection), and it also signals the end of washing program and reporting failures. In default setting the sound signal is on. You may select to switch the sound signal off, or increase volume. sound signal off Legend: normal sound signal setting increased volume setting If you switch the sound signal off the display indicates relevant symbol . Child protection Operation of the washer may be protected against accidental changes of programs or functions. The function is activated by pressing the START/PAUSE button (F). Temporary disengagement of the function (during the operation): - Keep the MENU knob (B) pressed for 4 seconds, relevant symbol flashes on the display. - Stop the program by pressing the START/PAUSE knob (F). - Press the START/PAUSE button (F) and reactivate the child lock. In case you fail press any knob within 15 seconds, the protection is automatically reactivated. Permanent disengagement of the function: a. ) During the operation: - Keep the MENU knob (B) pressed for 4 seconds. - Stop the program by pressing the START/PAUSE knob (F). - Using the MENU knob (B) move to child lock option. - Press the SELECTION knob (C) to disengage the function. b. ) After the program is completed: - Keep the MENU knob (B) pressed for 4 seconds. If you switch the machine off after the end of program and fail to disengage the child lock, it remains active during subsequent start of the machine. To select new program, you must first temporarily or permanently disengage the child lock function. The function remains active even during power failure. 242221 14 - Selection of partial programs ( , , , ) These are independent programs and may be used when you do not need the entire washing program. [. . . ] · There has been a failure in the power supply. Washing program does Door is not properly closed. FAILURE 2 Water does not enter Disturbed water inlet. FAILURE 3 Water is poorly pumped out or not at all (machine signals FAILURE 7). [. . . ]