User manual SMEG LB812C

[. . . ] CONTENTS 4 BEFORE USING THE APPLIANCE CHAPTER-1: • Correct Usage 6-7 • • • • General warnings Safety warnings 20-21 22 8-9-10-11 12-13-14-15-16-17 18 19 Packaging and Environment Savings Information CHAPTER-2: • • OVERVIEW OF YOUR DEVICE General Appearance Techincal Specifications INSTALLATION CHAPTER-3: • • • • • Removing transportation safety screws Adjusting Adjustable Stays Electrical connection 23-24-25 26-27 28 29-30 31 32 33-34 35 36-37 Water inlet hose connection Water discharge connection CHAPTER-4: • • • INTRODUCTION OF CONTROL PANEL Detergent drawer Programme knob Electronic display CONTENTS 5 PRELIMINARY PREPARATION FOR LAUNDERING Separating laundries 38-39 40 41 42-43-44 45-46-47-48-49-50 51 52 53 54-55-56-57-58-59-60-61 CHAPTER-5: • • • • • • • • Putting laundries in the machine Adding detergent into machine Operating your machine Auxiliary functions Child lock Cancelling programme Finishing programme PROGRAM TABLE CHAPTER-6: CHAPTER-7: • • • • MAINTENANCE AND CLEANING OF YOUR MACHINE Warning 62 63 64-65 66 67 68-69-70-71-72 Water inlet filters Pump filter Detergent drawer CHAPTER-8: CHAPTER-9: CHAPTER-10: CHAPTER-11: • • FLUSH STOPPER / BODY / DRUM TROUBLESHOOTING AUTOMATIC FAULT WARNINGS AND WHAT TO BE DONE 73 PRACTICAL INFORMATION 74-75-76-77 78-79 How to read the energy label and saving energy Disposal of your old machine 80 CHAPTER -1: BEFORE USING THE APPLIANCE (CORRECT USAGE) 6 • Definitely read the user’s manual. • Your machine is designed to be used domestically. Commercial use will cause your warranty to be cancelled. • Keep your pets away from your machine • Please check the packaging of your machine before installation, and the outer surface after the package is opened. [. . . ] • Spread your laundries in your machine. • Push the door of your machine until hearing the locking sound to close it. Selecting programme Select the convenient programme for your laundries on the programme table. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (OPERATING YOUR MACHINE) 43 AUXILIARY FUNCTIONS Before starting the programme, you can optionally select an auxiliary function. • Press on the button of auxiliary function you would like to select. • If auxiliary function symbol on electronic display flashes continuously, the auxiliary function you have selected will be activated. • If auxiliary function symbol on electronic display blinks, the auxiliary function you have selected will not be activated. Reason for non-activation: The auxiliary function you want to use in the washing programme you have selected is not applicable. • Your machine has passed over the stage, during which the auxiliary function you would like to select would be implemented. • It is not compatible with an auxiliary function you have selected previously. • CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (OPERATING YOUR MACHINE) 44 HALF-LOAD DETECTION SYSTEM Your machine features a half-load detection system. In case yuo put approximately half or less amount of launderies of maximum laundry capacity in your machine, your machine will run so as to save washing time, water consumption and energy in some programmes. When the halfload function is active, the machine can complete the programme you have set in a shorter time. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS 45 1- Temperature selection You can select the washing water temperature with the washing water temperature adjustment button. Whenever you select a new programme, the maximum washing water temperature is shown on the washing water temperature display. You can gradually decrease the washing water temperature between the maximum temperature and cold washing (--) by pressing washing water temperature adjustment button. If you have missed the washing water temperature you wanted, you can return to the intended temperature by continuously pressing the washing water temperature adjustment button. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS 46 2- Spin speed selection You can set the spin revolution for your laundries via revolution speed setting button. When you select a new programme, the maximum spin revolution speed of the programme you have selected will be viewed on the display of revolution speed. You can gradually reduce the revolution speed between cancel spinning (--) options through the maximum spin revolution of the programme selected by pressing revolution speed setting button. If you have skipped the spinning revolution you want to set, you can re-switch to the revolution by keeping the revolution setting button pressed. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS 47 3- Delay timer By using this auxiliary function, you can set the time when your machine start washing. This time can vary from an hour to 23 hours. To use auxiliary function of delay timer: - Press time delay button once. - Expression of “1 h” will appear on the display. - Symbol will flash on electronic display. - Press on time delay button until the time, on which you want washing operation to be started. - To activate the time delay you have selected in the programme, you may press on any auxiliary function button you like except “Start/Standby” button. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS 48 If you have skipped the time delay you want to set, you can go back to the time desired by keeping pressed on time delay button. If you want to cancel the time delay, you are required to press the time delay button once. symbol will no longer flash on electronic display. [. . . ] Grease and oil stains: Firstly, wie the residues. Scrub the spot with detergent and wash it with warm soapy water. Mustard: Apply glycerine on spotted area. If the spot cannot be removed, wipe with alcohol. (For synthetic and colour fabrics, a mixture of 1 scale of alcohol and 2 scales of water should be used) CHAPTER -11: PRACTICAL INFORMATION 76 Fruit: Stretch the spotted area of your laundry throughout the opening of a vessel, and pour cold water on it. [. . . ]