User manual SMEG LBHT712

[. . . ] 1 General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. 1. 1 Life and property safety u Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. This will cause problems with your product. [. . . ] Rinse Hold If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water. If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. Water is drained, laundry is spun and the programme is completed. C If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause mode. Indicative values for Synthetics programmes (EN) Programme Duration (min) * Water Consumption (l) Remaining Moisture Content (%) ** Remaining Moisture Content (%) ** Energy Consumption (kWh) Load (kg) ≤ 1000 rpm 45 45 > 1000 rpm 40 40 Synthetics 60 Synthetics 40 3 3 52 49 1. 10 0. 60 105l-135l 105l-135l * You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. ** Remaining moisture content values may differ according to the selected spin speed. Washing Machine / User’s Manual 41 / EN 4. 3. 6 Programme and consumption table EN 2 Energy Consumption (kWh) Auxiliary functions Water Consumption (l) Risciacquo Aggiuntivo Max. Speed*** Programme (°C) Selectable temperature range °C Prelavaggio Cotone Eco Antiallergico Camicie Mix Sport Tende Capi Scuri Jeans Lingerie Lavaggio a Mano Delicati Rapido 14’ Lana Sintetici Cotone 60** 60** 40** 90 60 40 40 40 40 40 30 30 20 30 40 60 40 90 60 40 7 3. 5 3. 5 7 3. 5 3. 5 3 2 3 3 1 1 3. 5 2 1. 5 3 3 7 7 7 51 46 46 85 57 60 55 72 60 60 52 40 45 35 49 52 49 70 70 67 0. 91 0. 69 0. 64 1. 90 1. 00 0. 70 0. 55 0. 60 0. 60 0. 65 0. 30 0. 25 0. 15 0. 15 0. 25 1. 10 0. 60 2. 20 1. 55 0. 90 1600 1600 1600 1600 800 1000 1000 800 1000 1000 1000 1200 1200 1400 1200 1200 1200 1600 1600 1600 Rapido • • • * • • • • • * • * * • * • • • • • • • • • • • • • • • • • • Cold-60 Cold-60 Cold-60 30 - 90 Cold-60 Cold-40 Cold-40 Cold-40 Cold-40 Cold-60 Cold-30 Cold-30 20 Cold-30 Cold-40 Cold-60 Cold-60 Cold-90 Cold-90 Cold-90 • * ** *** **** - : Selectable. : Energy Label programme (EN 60456 Ed. 3) : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. : Program will detect the type and amount of the laundry which you put into the machine and adjust the water consumption, energy consumption and program duration automatically. : See the programme description for maximum load. ** “Cotton eco 40°C and Cotton eco 60°C are standard programmes. ” These programmes are known as ‘40°C cotton standard symbols on the panel. programme’ and ‘60°C cotton standard programme’ and indicated with the  The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. “Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed. ” “The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine. ” "The manufacturer reserves the right to make modifications in the programmes and auxiliary functions given in the table. While these modifications will not change the machine performance, programme steps and durations can be changed. " C 42 / EN Washing Machine / User’s Manual 4. 3. 7 Auxiliary function selection Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator light will illuminate. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme after the washing cycle starts. If the wash cycle has reached a point where no auxiliary function can be selected, an audio warning will be given and the related auxiliary function's light will flash. C C Indicator lights of the auxiliary functions that are not allowed to be selected with the current programme will flash and an audio warning is given. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active. [. . . ] • Put the detergent in the correct compartment. • There may be problem in the valves or in the detergent dispenser. • Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. • Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. [. . . ]