User manual SMEG LSA6345XSA

[. . . ] INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. 6. Safety and operating instructions ___________________________ 2 Installation and hook-up __________________________________ 7 Description of the controls _______________________________ 12 Operating instructions ___________________________________ 24 Cleaning and maintenance _______________________________ 39 Troubleshooting _______________________________________ 43 Thank you for choosing one of our products. You are advised to read this manual carefully; it contains all the information you need about the right conditions for the proper, safe use of your dishwasher. The individual sections are laid out to provide you with a step-by-step guide to all your appliance's functions; the texts are easy to understand and are complete with detailed illustrations. [. . . ] The machine will perform a dish pre-washing, and when finish, the “delay program” will enter in function as it was first set. In case you want to put to zero the “delay program” within the running program it is necessary: • • to press the START/PAUSE button for some seconds until the START/PAUSE (D) symbol remain lid up on the display; to press the DELAY PROGRAM more times until the reset of the delay program (START/PAUSE symbol shut off); • to press the START/PAUSE button to make start the program. N. B. : It is not possible to select the “delay program” when the program have already began. 20 User instructions OPTIONS The options are controlled by the OPTION SELECTION button . Press the button to access the procedure, confirmed by flashing of one of the OPTIONS lights (E). N. B. : The PROGRAM DELAY light only comes on when the specific PROGRAM DELAY button is pressed. Press the SELECT OPTIONS button again to display the next option. To confirm an option, press the CONFIRM OPTION button (the light stops flashing and remains on). This operation can be carried out for one or all of the options available. To deactivate an option which has already been confirmed, press the OPTION SELECTION button until the OPTION LIGHT required flashes, and press the CONFIRM OPTION button . All options except "Flexi Tabs" are disabled at the end of the wash cycle. QUICK TIME PROGRAMS Select this option together with any washing program (except the soak program) to SHORTEN the cycle by from a minimum of 10% to a maximum of 55%, depending on the cycle selected. To activate this option, press the QUICK OPTION button (light comes on) after selecting the program required. The option is automatically deactivated at the end of the program. 21 User instructions ENERSAVE This option can be selected with the wash programme of choice to further reduce energy consumption. Drying is aided by a special device that automatically releases the door, which opens slowly and smoothly by a few centimetres. This ensures perfect drying and greater control of rinsing temperatures, which can be kept at lower levels for significant energy saving. Once the door has opened, the end of the wash cycle is indicated by a short beep. Enersave is activated automatically every time a wash cycle is selected (except for programs that do not include the final drying phase; see programs table) and can be disabled before the program is started. Flexi Tabs, once selected, remains enabled until intentionally disabled. When the function is activated, opening of the door must not be impeded in any way; do not leave anything in the space in front of the door necessary to allow it to open. Do not re-close the door during automatic opening as this would damage the mechanism. Wait for the pushers to retract before re-closing the door. Flexi Tabs Ideal for multi-function detergents, this option allows washing to be optimised, with full benefits from the combined-action tablets. When this option is activated, any salt and rinse aid in the relative containers will not be used. If the option is not provided, we recommend the use of conventional products (separate detergent, salt and rinse aid), because with conventional washing cycles, combined products might create problems such as a white deposit, poor drying results and residues left on dishes. N. B. : When the salt and rinse aid containers are empty, the relative lights will remain on even if the “Flexi Tabs” option is selected. [. . . ] • When removing the filter, take care that there are no food residues on it. If any residues fall into the washing pit they might block hydraulic components, or foul the spray arm nozzles. • It is essential to thoroughly clean the filters according to the above instructions: the dishwasher cannot function if the filters are clogged. • Carefully replace the filters in their seats, to avoid damaging the wash pump. [. . . ]