Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SMEG PGD75-3. We hope that this SMEG PGD75-3 user guide will be useful to you.
Lastmanuals help download the user guide SMEG PGD75-3.
Detailed instructions for use are in the User's Guide.
[. . . ] ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE "ZERO" (OFF) POSITION WHEN YOU FINISH USING THE OVEN.
NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY LIGHTED AND CAUSE FIRES.
24
Precautions for safety and use
DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN.
THE I. D. PLATE WITH TECHNICAL DATA, SERIAL NUMBER AND BRAND NAME IS POSITIONED VISIBLY ON THE OVEN DOOR FRAME. THE USE OF THIS APPLIANCE IS NOT PERMITTED TO PEOPLE (INCLUDING CHILDREN) OF REDUCED PHYSICAL AND MENTAL ABILITY, OR LACKING IN EXPERIENCE IN THE USE OF ELECTRICAL APPLIANCES, UNLESS THEY ARE SUPERVISED OR INSTRUCTED BY ADULTS OR PEOPLE RESPONSIBLE FOR THEIR SAFETY. [. . . ] For operation on 220-240V: use a threepole cable of the H05RR-F or H05V2V2-F type (cable with a cross-section of 3 x 1. 5 mm2). The end to be connected to the appliance must be an earth wire (yellow-green) at least 20 mm longer. The manufacturer declines all responsibility for damage to persons or things caused by the non-observance of the above prescriptions or deriving from tampering with any part of the appliance.
26
Instructions for the installer
2. 2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it is heat-resistant. Proceed according to the dimensions shown in Figures 1 and 2.
Fixing is carried out using 4 screws at the corners "C" of the oven door frame, after removing the side panels secured by the screws "A" and the supports "B" as shown in figure 3. To replace the side panels, take care to engage the pins inside them correctly with the supports "B", then retighten the screws 3. Never use the oven door to lever the oven into place when fitting. Avoid exerting too much pressure on the oven door when open.
27
Instructions for the User
3. DESCRIPTION OF CONTROLS
3. 1 Control panel
All the oven controls are grouped together on the front panel.
FUNCTION SWITCH KNOB Turn the knob in either direction to select a function among the following:
NO FUNCTION SET OVEN LIGHT GRILL ELEMENT + VENTILATION UPPER AND LOWER HEATING ELEMENTS + VENTILATION LOWER HEATING ELEMENT + VENTILATION VENTILATED HEATING ELEMENT DEFROSTING (NO ACTIVE HEATING ELEMENT)
UPPER AND LOWER HEATING ELEMENTS WIDE GRILL ELEMENT
28
Instructions for the User
THERMOSTAT KNOB The cooking temperature is selected by turning the knob clockwise to the desired setting, between 50° and 250°C.
THERMOSTAT INDICATOR LIGHT The light comes on to indicate that the oven is heating up. When it goes out, the preset heating temperature has been reached. When the light flashes regularly it means that the temperature inside the oven is kept steady on the set level.
3. 2 Clock + timer
Allows to select the timer. 3. 2. 1 Setting the time To set the correct time, press and turn knob A clockwise. Rotisserie rod: useful for cooking chicken, sausages and all foods which require uniform cooking over their entire surface.
Main oven rotisserie frame: to be fitted into the holes provided in the oven plate.
Accessories available on request Original accessories may be ordered from any Authorised Service Centre.
32
Instructions for the User
6. COOKING HINTS
In fan-assisted mode preheating should be carried out at 30/40°C above the cooking temperature. This considerably shortens cooking times and reduces power consumption, as well as giving better cooking results. Keep the oven door closed during cooking.
6. 1 Traditional cooking
FUNCTION SWITCH THERMOSTAT
50 ÷ 250°C
This traditional cooking method, in which heat comes from above and below, is suitable for cooking food on a single level. You have to pre-heat the oven until the set temperature is reached. Place the food in the oven only after the thermostat indicator light has turned off. Put frozen meat in immediately, without waiting for it to thaw. The only precaution you need to take is to set the temperature about 20°C lower and cooking time about 1/4 longer than you would for fresh meat.
6. 2 Hot-air cooking
FUNCTION SWITCH THERMOSTAT
50 ÷ 250°C
This system is suitable for cooking on several levels, including different types of food (fish, meat etc. ), without tastes and smells mingling. Air circulation in the oven ensures a uniform distribution of heat.
33
Instructions for the User
Multiple cooking is possible as long as the cooking temperature of the different foods is the same.
6. 3 Grill cooking
FUNCTION SWITCH THERMOSTAT 225
Permits rapid browning of foods. For short-term cooking of small quantities, place the rack in the fourth runner from the bottom. For long-term cooking and grills, put the rack in the lowest runner in accordance with the size of the pieces.
6. 4 Hot-air grilling
FUNCTION SWITCH THERMOSTAT 200
Ensures uniform heating with greater heat penetration into the food. [. . . ] Now rock the frames B to insert the tip of the rod into the drive connection C of the rotisserie motor on the side of the oven. Pour a little water in the tray to prevent smoke from forming. Keep the oven door closed during cooking. Heating up time must not exceed 60 minutes.
35
Instructions for the User
It is normal for the thermostat light to flash during cooking. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SMEG PGD75-3
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SMEG PGD75-3 will begin.