User manual SMEG PV164N

[. . . ] 19 9. 1 Technical specifications data plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9. 2 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9. 3 Overall dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 9. 4 Positioning the hotplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Ask your dealer or competent local authority for the addresses of local recylcing plants or collection centres for waste disposal and scrapping. Do not discard the packaging or parts thereof in the environment. In the hands of young children, packaging materials can cause suffocation, plastic bags in particular. Even when scrapping your old appliance, do so responsibly!Important: deliver it to your local centre authorized for the scrapping of electrical appliances. Proper scrapping allows sensible recovery of valuable materials. 14 Safety Precautions 3. SAFETY PRECAUTIONS ELECTRICAL CONNECTION: SEE INSTALLATION INSTRUCTIONS FOR SAFETY REGULATIONS PERTAINING TO ELECTRICAL APPLIANCES. IN THE INTERESTS OF SAFETY, THE LAW REQUIRES THAT INSTALLATION AND MAINTAINANCE OF ELECTRICAL APPLIANCES BE CARRIED OUT BY COMPETENT PERSONS IN ACCORDANCE WITH CURRENT REGULATIONS. OUR RECOGNIZED INSTALLERS PROVIDE A GUARANTEE OF GOOD WORKMANSHIP. ELECTRICAL APPLIANCES MUST ONLY BE DISMANTLED BY A QUALIFIED ELECTRICIAN. THE PLUG TO BE CONNECTED TO THE POWER SUPPLY CABLE AND THE SOCKET MUST BE OF THE SAME TYPE AND MUST CONFORM TO CURRENT REGULATIONS. The appliance is designed and manufactured for professional use and conforms to all current relevant EEC directives. The manufacturer declines all liability for damage or injury resulting from improper use of the appliance. Attention: The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from non-observance of the above prescriptions or from tampering with any part of the appliance or for the use of non-original spare parts. 5. KNOW YOUR APPLIANCE HANDLE LID GLASS CERAMIC HOTPLATES THERMOSTAT KNOB ON-OFF SWITCH THERMOSTAT INDICATOR LED DRAIN HOLE REMOVABLE TRAY CLUTCH 6. BEFORE INSTALLATION Do not leave the packaging materials unattended. Separate the different waste materials of the packaging and deliver them to the nearest collection centre for recyclable waste. We advise you clean the appliance before use in order to remove any residue from manufacturing. For more details on cleaning, see chapter "8. Before cooking for the first time, clean the cooking hotplate. Subsequently, switch the hotplate on for 5 minutes at the highest setting. This will help eliminate "the new smell" and will burn off any humidity that might have built up inside the heating elements. [. . . ] INSTALLING THE APPLIANCE The hotplate must be installed on a horizontal worksurface, and must be freestanding. The distance from the rear wall must allow easy access to the terminal board in order to allow connection of the power supply cable. Installation must be carried out by a qualified technician and in accordance with current EEC regulations. 9. 1 Technical specifications data plate Make sure that the voltage and capacity of the power supply cable conform to the data shown on the plate located under the protective cover. Do not remove this plate for any reason. 9. 2 Electrical connection Regulations require that the appliance is earthed in accordance with electrical safety regulations. Make sure that the voltage and capacity of the power supply cable conform to the data shown on the plate located on the rear of the appliance. [. . . ]