User manual SMEG SA9066AS

[. . . ] INSTRUCTIONS FOR SAFE AND PROPER USE________________ 4 INSTALLATION OF THE APPLIANCE_________________________ 6 GAS CONNECTION _______________________________________ 7 ADAPTATION TO DIFFERENT TYPES OF GAS _______________ 10 FINAL OPERATIONS _____________________________________ 12 DESCRIPTION OF CONTROLS ____________________________ 14 USE OF THE HOB _______________________________________ 21 USE OF THE OVEN ______________________________________ 23 AVAILABLE ACCESSORIES _______________________________ 25 COOKING HINTS ________________________________________ 26 CLEANING AND MAINTENANCE ___________________________ 32 EXTRAORDINARY MAINTENANCE _________________________ 34 PROBLEMS AND CAUSES ________________________________ 36 Thank you for choosing our product. We advise you to read this manual carefully. It contains all necessary instructions for maintaining unaltered the appearance and functional qualities of the cooker. INSTRUCTIONS FOR THE INSTALLER: these are for the authorised persons who must carry out a suitable check of the gas system, install the appliance, set it functioning and carry out an inspection test. INSTRUCTIONS FOR THE USER: these contain user advice, description of the commands and the correct procedures for cleaning and maintenance of the appliance. 3 Introduction 1. [. . . ] 6. 2. 9 Changing the set data The cooking data entered can be changed at any time by keeping the or . function key pressed and at the same time adjusting the keys 18 Instructions for the user 6. 3 Digital timer (certain models only This component allows an on-off beeper to be set to indicate the end of the cooking time. It is therefore just a timer, with no programming functions. LIST OF FUNCTIONS TIME-SETTING BUTTON DECREASE TIME KEY INCREASE TIME KEY 6. 3. 1 Setting the time When the oven is used for the first time, or after a power blackout, the display flashes on and off at regular intervals showing . Press the key and use the or 6. 3. 2 Setting the timer keys to set the current time. To set the timer, press the key and keep it pressed until the required key is released, after 5 number of minutes is shown. When the seconds the countdown will start; once this finishes, an acoustic device will sound. During the countdown the display will show the symbol; pressing the key displays the current time for 5 seconds. 6. 3. 3 Deactivating the acoustic device The acoustic device stops sounding automatically after seven minutes. It can be deactivated in manual mode by pressing the key. 6. 3. 4 Adjusting the volume of the acoustic device The volume can be adjusted (3 settings) while it is in operation by pressing the key. 6. 3. 5 Modifying the data set The timer data set can be modified at any moment by pressing the keys. or 19 Instructions for the user 6. 4 Analogue clock (only on equipped models) The mechanical timer is set by turning the knob clockwise. The timer can be set from 0 to 55 minutes. At the end of the cooking time, an alarm signal will be heard: to stop the alarm turn the external part of the knob to position . The clock is set by pulling the knob and turning it clockwise. 20 Instructions for the user 7. USE OF THE HOB 7. 1 Lighting of the hob burners Before lighting the hob burners check that the flame caps are in the correct position and that their burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plugs and thermocouples. Before lighting the burners lift the glass cover; before lowering the cover, turn off all the burners and wait for them to cool down. The optional grid B is for use with "woks" (Chinese pans). To prevent deterioration of the hob we have equipped the cooker with a raised pan stand C to be placed underneath pans more than 26 cm in diameter. The supplied reduction rest C is also used for small pans. The drawing next to each knob shows the corresponding burner. The appliance has an electronic lighting device. Simply press and turn the knob anticlockwise to the minimum flame symbol , until the ring is lit. Hold the knob down for a few seconds to allow the thermocouples to heat up. [. . . ] In case of tough spots, clean with a damp sponge using regular detergent. 33 Instructions for the user 12. EXTRAORDINARY MAINTENANCE Ovens periodically require small maintenance interventions or replacement of parts subject to wear and tear such as gaskets, electric bulbs etc. Specific instructions for each intervention of this type appear below. Before performing any operations requiring access to powered parts, switch off the power supply to the machine. 12. 1 Lubrication of gas taps With time it may happen that the gas taps get blocked and hard to turn. [. . . ]