User manual SMEG SBA1

[. . . ] To avoid burns and scalds, young children should be kept away. • Keep children under eight years of age at a safe distance if they are not constantly supervised. • Young children should be supervised to ensure that they do not play with the appliance. • Never rest metallic objects such as knives, forks, spoons and lids on the appliance during use. [. . . ] The appliance waits for the set start time. Modifying the data set during programmed cooking After modifying the cooking time, the end of cooking time must be reset. During operation, it is possible to modify programmed cooking duration: 1. When the and symbols are lit steadily and the appliance is waiting for cooking to start, press the temperature knob twice. Turn the control knob to alter the previously set cooking time. The symbol switches off and starts flashing. The display shows the end of cooking time. Turn the control knob to delay the end of cooking time. After a few seconds the and symbols stop flashing and programmed cooking restarts its operation with the new settings. 5. At the end of the cooking time “cooking completed” appears on the display and a buzzer will sound that can be deactivated by pressing the control knob. To extend the cooking time manually, press the control knob again. The appliance will resume its normal operation with the previously selected cooking settings. Select the sub-category of dish to cook. If you choose the “Start” option, cooking will start with the program's predefined settings and the display will show all the parameters set. Select the type of cooking (where possible, based on the dish chosen) The time shown does not include the time to reach temperature. Once the set temperature has been reached, the cooking program will have the duration shown. 21 EN 3. 8 Preset recipes 4. Select the weight of the food to cook by turning the control knob. Use The predefined cooking parameters can be changed at any time, even after cooking has started. A message will indicate when to place the food in the oven and enable the start of cooking. It is not recommended to place the dish in the oven during the automatic pre-heat stage. Press the return knob to exit and finish the program. Select the program to change and the change option. Program end 1. When the program has finished, the appliance will warn the user with symbol. Select the function to associate with the program using the control knob. 2. [. . . ] If it has not, the oven has a safety device that does not allow functions to be selected while the door lock is active. This is because the temperature inside the oven is still too high to permit any type of cooking. The display shows “Error 4”: • The door lock has not properly attached to the door. This might be because the door was accidentally opened during the door lock activation. [. . . ]