User manual SMEG SC54X

[. . . ] PRECAUTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY . . . . . . . . . . . . 5 SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 GET TO KNOW YOUR OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The duration can also be reset by resetting the program selected: pressing the central key for 1 or 2 seconds will delete the duration set and the oven will have to be switched off in manual mode. Press the value modification keys or within 5 seconds to increase or decrease the setting by one minute for each pressure. Press one of the two value modification keys until the current time appears. Before each programmer setting, switch on the function and set the temperature required. 8. 2 Semiautomatic cooking This function only switches the oven off automatically at the end of the cooking time. Press the key and the display will light up showing the figures ; keep it pressed, and at the same time use the value modification keys or to set the cooking duration. A few seconds after the key is released, the count of the programmed cooking duration will start and the display will show the current time together with the symbols A and . 8. 3 Automatic cooking 15 Instructions for the user This function switches the oven on and off in fully automatic mode. Press the key and the display will light up showing the figures ; keep it pressed, and at the same time use the value modification keys or to set the cooking duration. Press the key and the display will show the sum of the current time plus the cooking duration just set: keep it pressed, and at the same time use the value modification keys or to adjust the cooking end time. A few seconds after the key is released, the programmed count will start and the display will show the current time together with the symbol A. When the cooking start time calculated automatically by the timer on the basis of the data entered is reached, the display will show the A and symbols together After the setting, to view the cooking time left press the key; to view the cooking end time press the key. The logic prevents the setting of incompatible values (e. g. the timer will not accept a cooking end time with a duration which is too long for this value). 8. 4 Minute-Minder key The programmer can also be used as an ordinary timer. Press the and the display will show the figures ; keep it pressed and simultaneously press the value modification keys or . When the key is released the programmed count will start and the display will show the current time and the symbol . After the setting, to display the time left press the key. In timer mode, the system will not cut out operation of the oven at the end of the set time. 8. 5 End of cooking At the end of the cooking time the oven will switch off automatically and simultaneously a buzzer will start to sound in on-off mode. After the buzzer is stopped, the display will return to showing the current time together with the symbol, indicating that the oven is again ready for use in manual mode. 8. 6 Adjusting the buzzer volume The buzzer volume can be varied (3 settings) while it is in operation by pressing . 16 Instructions for the user 8. 7 Stopping the buzzer The buzzer stops automatically after seven minutes. It can be stopped in manual mode by pressing the and keys together. To switch off the appliance, return all the knobs to the 0 setting in sequence. 8. 8 Deleting the data set or ) With the program set, keep the key of the function for deletion ( pressed, while at the same time setting the value by pressing the value modification keys or . The timer will interpret deletion of the duration as the end of cooking. 8. 9 Modifying the data set The cooking data set can be modified at any moment by keeping the key of the function for modification ( or ) pressed and at the same time pressing the value modification keys or . 17 Instructions for the user 9. USING THE OVEN Before using the oven, check that the display is showing the symbol (see point "8. 1 Setting the time"). 9. 1 Precautions and General Advice When the oven and grill are used for the first time, they should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process, which might contaminate foods with unpleasant smells. During cooking, do not cover the bottom of the oven with aluminium or tin foil, and do not place pans or trays on it; this may damage the enamel coating. [. . . ] The appliance must be connected to earth in compliance with electrical system safety regulations. If a permanent connection is used, the appliance's power supply line must be fitted with an omnipolar breaking device with contact gap of at least 3 mm, located in an easily accessible position close to the appliance itself. If a socket and plug connection is used, check that they are of the same type. Do not use reducers, adapters or junctions since they may cause overheating or burns. [. . . ]