User manual SMEG SC709X

[. . . ] INSTRUCTIONS FOR SAFETY AND USE . . . . . . . . . . . . . . . . . . . . . 32 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 DESCRIPTION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 USING THE OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the dial will flash. The duration can also be reset by deleting the program selected: Press the central key for 2 seconds to cancel the set duration and the oven will have to be manually switched off. Warning: it is not possible to set cooking durations of more than 12 hours. . 41 Instructions for the user Cooking start: as well as setting a cooking duration, the cooking start time can also be set (with a maximum delay of 12 hours in relation to the current time). To set the cooking start/end time, proceed as follows. · · Set the cooking duration as described in the previous point. Within 5 seconds of last pressing key or , press key again · · · to set the cooking end time. Symbol will flash on the display together with the current time, with internal segments illuminated to show the end of cooking time. Use keys and to set the cooking end time. 5 seconds after the last key is pressed, the display will show the current time and the cooking start and end times, which will be represented by the illuminated inside segments. The display segments will be constantly illuminated as long as the current time is not the same as the cooking start time; as soon as the current time reaches the set starting time, all the inside segments will start to flash, indicating that the oven has started cooking. At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the dial will flash. To delete the entire set program, hold down the central key for 2 seconds; if cooking has already started, the oven will have to be switched off manually. Here we can see a programming example: the current time is 7:06 and cooking is programmed to start at 8. 00 and end at 9. 00. When using the oven, remove all unused trays and racks from its interior. During cooking, do not cover the bottom of the oven with aluminium or tin foil and do not place pans or oven trays on it as this may damage the enamel coating. If you wish to use greaseproof paper, place it so that it will not interfere with the hot air circulation inside the oven. 44 Instructions for the user 5. AVAILABLE ACCESSORIES The oven features 4 runners for positioning trays and racks at different heights. Not all accessories are provided on some models. Rack: useful for holding cooking containers. Tray rack: for placing on top of a tray for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the rack above. Baking pan: for baking cakes, pizza and oven desserts. Roof liner: remove it to make cleaning inside the oven easier. Chromium-plated gripper: useful for removing hot racks and trays. Rotisserie rod: useful for cooking chicken, sausages, kebabs and all foods which require uniform cooking over their entire surface. Rotisserie supports: to be inserted in the holes of the oven tray before using the rotisserie rod. Accessories available on request Original accessories may be ordered from any Authorised Service Centre. 45 Instructions for the user 6. [. . . ] Raise the door to an angle of about 45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, then lower the levers A. 55 Instructions for the user 7. 4. 2 Removing the door with pins Open the door completely and insert the pins (supplied) into the holes from the inside. Close the door to an angle of about 45° and lift it off. [. . . ]