User manual SMEG SCA712N

[. . . ] INSTRUCTIONS FOR USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 INSTRUCTIONS FOR DISPOSAL ­ OUR ENVIRONMENTAL CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GET TO KNOW YOUR OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the preset temperature is reached, a series of beeps will be emitted indicating that the oven is ready for use. The cooking time as specified in the table "7. 9 Table of predefined recipes:"starts from this moment. 7. 8. 1 Modifying the data set (during cooking) During the cooking it is possible to modify preset temperature turning PT1 to the right of left. To modify the duration press PT1 and turn it to increase or decrease the value. The modification operations to the data set must be carried out when both the symbols , are steady on. 7. 8. 2 Automatic cooking with a recipe To set automatic cooking, select a recipe and follow the instructions described in paragraph "Automatic cooking" at page 14. The use of this function is recommended in cooking operations that require a preheated oven, such as pizzas and cakes. 16 Instructions for the user 7. 8. 3 Selecting a recipe permanently The oven has 9 preset recipes (see "Table of predefined recipes:" at page 18), and 3 to set according to your own named cooking preferences . In addition, you can modify the other recipes that are already preset. To modify or set a recipe permanently: 1 From ON status, select the recipe to modify with PT2. Within 5 seconds of the selection, hold down PT1 for at least 2 seconds. The 2 3 4 symbol flashes indicating the recipe modification phase. Now, by turning PT1, you can modify the cooking function to associate to the recipe being modified. The preset temperature will be displayed on DSP2 flashing; press PT1 to modify it. The preset cooking duration will be displayed on DSP1 flashing. The recommended runner will flash; turning PT1 you can modify the number. Press PT1 to exit the programming, the symbol will stop flashing. 5 17 Instructions for the user 7. 9 Class Table of predefined recipes: Type Qty. (°C) Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg Kg 200 200 200 180 190 180 190 190 180 190 180 200 200 170 160 160 280 180 180 Cooking Funct. Runner duration (min. ) 30 40 65 50 85 110 40 60 90 65 100 35 45 45 50 60 8* 65 20 0. 7 Beef Roast-beef 1 1. 5 0. 5 Pork Roast 1 1. 5 0. 5 Chicken Roast chicken 1 2 Lamb Fish Roast leg of lamb Bass baked in foil 1. 0 1. 5 0. 7 1. 0 1 Vegetables Stuffed peppers 1. 5 2 Pizza Cakes Biscuits Pizza pie Apple pie Lemon biscuits 1 pizza 8 people 1 tray The cooking times specified in the table refer to the food indicated in the recipe; they are approximate and may vary depending on the weight. To reset a recipe with the original settings after it has been modified, just enter the data given in the table. If the PO limiter mode is activated (see secondary menu) the cooking times can vary from those indicated. 18 Instructions for the user 7. 10 Secondary menu This appliance also has a concealed "secondary menu" allowing the user to: 1 Activate or deactivate the child safety device 2 Activate or deactivate the Showroom mode (which disables all the heating elements so that only the control panel works). 3 Activate or deactivate low power mode. In OFF status (see "7. 4 Operating modes") turn both commands (PT1 and PT2) to the right at the same time and keep them turned for at least 5 seconds. Turning PT1 to the right or left changes the setting status (ON / OFF or HI/LO). Press PT1 to move on to setting of the next function. Child lock-out mode: activating this mode after two minutes of operation without any intervention from the user the controls will automatically be locked, indicated by the coming on of the symbol . [. . . ] Check whether the "PO" mode has been set, for further details see paragraph "Secondary menu" at page 19. It is a normal operation of the appliance, useful for when cooking foods to avoid excessive heat escaping. When the door is closed, the oven will return to normal operation. The oven does not heat up The controls do not respond. · · The cooking times are · longer than those indicated in the table. If the door is opened during a ventilated function, the fans stops. [. . . ]