Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SMEG SCD60MFX5. We hope that this SMEG SCD60MFX5 user guide will be useful to you.
Lastmanuals help download the user guide SMEG SCD60MFX5.
Detailed instructions for use are in the User's Guide.
[. . . ] Remove the blue protective film from the panel (depending on model). · After unpacking, make sure that the washing machine is undamaged. If in doubt, do not use the washing machine. Contact After-Sales Service or your local retailer. [. . . ] A small quantity of water can remain in the dispenser. It is advisable to carry the dispenser in an upright position. You can also remove the siphon caps in the dispenser for cleaning. Replace the siphon caps in the dispenser (if removed). Replace the dispenser by locating the bottom tabs in the lid holes and pivot until both of the upper buttons lock. Note: ensure that the detergent dispenser is correctly reinstalled.
GB 10
6GB10055. fm Page 11 Monday, August 2, 2004 12:33 PM
Water inlet hose filter
Check and clean regularly (at least two or three times a year). Carefully clean the filter located at the end of hose, without assembling it, for example with a tooth-brush. Note: For machines equipped with hose type "A", it must not be submerged in water. Screw the flexible hose back onto the tap by hand. Do not use pliers (risk of squashing the joint). Turn on the tap and check that the connections are watertight. · the water tap is open.
*The washing machine stops during the programme.
Check whether: · the "Rinse Hold" button is pressed: terminate this option by pressing the button again. · the pump/foreign body trap is blocked (see "Cleaning the Foreign Body Trap"). · the Water stop could be activated (see "Water stop fault").
*Detergent and additive product residues remain in dispenser at end of wash.
Check whether: · the detergent dispenser is properly installed and is not blocked (see "Care and maintenance"). · the foreign body trap in the water inlet hose is not blocked (see "Care and maintenance").
*Insufficient or no water supply.
Switch off the washing machine and unplug it. Check whether: · the water tap is fully turned on, and the water supply pressure is sufficient. · the water inlet hose is kinked. · the mesh filter in the water inlet hose is blocked (see "Care and maintenance"). · the water in the water inlet hose is frozen. · the washing machine has a safety hose and the safety valve is open (red indicator in the safety valve inspection window). In this case replace it with a new safety hose.
*The washing machine vibrates during the spin cycle.
Check whether: · the washing machine is levelled and all the feet are adjusted (see "Installation"). · the transport bracket has been removed. [. . . ] Open the door and the drum flaps and unload the machine. SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START 1. Select the new programme, temperature and options. Press the "On/Off" button to switch on the appliance. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SMEG SCD60MFX5
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SMEG SCD60MFX5 will begin.
