User manual SMEG SE2631TC

[. . . ] pressing the on/off switch key switches on the control system. Put your finger on the button until a "0" lights up at all of the cooking level displays and the cooking zone stand-by dot flashes. The next action must be carried out within ten seconds, otherwise the control system will automatically switch off again. Select a cooking level from 1 to 9 by means of the minus or plus keys /. [. . . ] under certain circumstances the material is sensitive to mechanical stresses and strains. A heavy knock or blow in a small area can cause the ceramic hob to break. If careless treatment results in a break, split or crack, the ceramic hob must immediately be taken out of use and disconnected from the mains power supply. To do this, switch off the safety switch for the oven connection in the fuse box. do not use the glass ceramic hob as a storage area!Never prepare food in aluminium foil and plastic containers on the hot cooking zone. Do not switch the hob on without using it for cooking. Do not place combustible, volatile or heat deformable objects directly underneath the hob. When preparing food with fat or oil stay nearby. Never pour water into burning fat or oil. Cover the dish in order to extinguish the fire and switch off the cooking zone. let the dish cool down on the cooking zone. In addition, make sure that leads from electrical appliances plugged into nearby sockets cannot come into contact with the hotplates. Never clean the glass ceramic hob with a steam cleaner or similar appliance!Always clean the hob after it has cooled down. Even the slightest amount of dirt will burn into the surface the next time you switch it on. Do not use oven sprays as these are aggressive and damage the surface. Use a damp cloth or a warm rinse to clean light amounts of dirt from the surface. Rinse with cold water and then dry thoroughly. Use vinegar, lemon juice or a calcium dissolving agent to remove water stains from the surface. Use "Sidol Special for Stainless Steel", "Stahlfix" or "Cerafix" to remove heavy dirt. Apply the cleaner with kitchen paper and rub it in. [. . . ] The connection cable must be at least H05 VVF. If the excess cable of this appliance is damaged, it has to be replaced by the manufacturer, the Customer service of the manufacturer or by another qualified person to avoid danger. Make sure that the excess cable length is not laid in the hob's installation area. Ensure that all live connections are safely insulated when installing the oven. [. . . ]