User manual SMEG SFA6109

[. . . ] Contents 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 General safety instructions Manufacturer liability Appliance purpose Disposal Identification plate This user manual How to read the user manual General Description Control panel Other parts Available accessories Instructions First use Using the accessories Using the oven Cooking advice Special functions Secondary menu Instructions Cleaning the appliance Removing the door Cleaning the door glazing Vapor Clean (on some models only) Pyrolytic function (on some models only) Extraordinary maintenance 4 5 5 5 6 6 6 2 Description 7 7 8 8 9 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 11 11 11 12 13 20 22 25 4 Cleaning and maintenance 28 28 28 28 29 32 35 37 5 Installation 5. 1 Electrical connection 5. 2 Cable replacement 5. 3 Positioning 39 39 39 40 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www. smeg. com 3 EN 1 Instructions 4 Instructions 1 Instructions 1. 1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Never touch the heating elements during use. • Keep children under eight years of age at a safe distance if they are not constantly supervised. [. . . ] Defrost by weight This function defrosts foods on the basis of the type and weight of the frozen product. Press and turn the function knob to select the defrost by weight function, marked by the indicator light and . 3. Turn the programming knob to adjust the duration (from 1 minute to 13 hours). Press the programming knob to confirm the values entered. Press the function knob to start defrosting. At the end of the defrost time STOP flashes on the display and a buzzer will sound that can be deactivated by pressing the function knob. 3. Turn the function knob to select the type of food to defrost. Press and turn the programming knob to select the weight (in grams) of the food to defrost. Press the function knob to confirm the parameters and start defrosting. 22 Use 7. At the end of the defrost time STOP flashes on the display and a buzzer will sound that can be deactivated by pressing the function knob. Press the function knob to start the proving function. While the function is in progress, it is possible to set a minute minder (see “Minute minder”), a proving duration (see “Timed cooking”) or delayed proving (see “Programmed cooking”). Press the programming knob to make the desired changes. Weight (g) 500 400 300 300 Time (min) 105 40 45 20 Preset parameters: dE Type Meat Fish Fruit Bread Unless otherwise set, the proving will have a maximum duration of 13 hours. The light inside the oven will remain off during the proving function. When the proving function finishes a buzzer will sound; to stop the buzzer, press the function knob. It is not possible to modify the temperature of the proving function. Proving For successful proving, a container of water should be placed in the bottom of the oven. Press and turn the function knob to select the proving function. 23 EN Use Sabbath The appliance follows some specific behaviour when operating in this function: • Cooking can proceed indefinitely, it is not possible to set any cooking duration. • The cooking temperature which can be selected varies between 60-100 °C. • Oven light disabled, any operation such as opening the door (where present) or manual activation with the knob will not activate the light. • Knob lights and buzzers disabled. After activating the Sabbath function it will no longer be possible to modify any parameters. Any action on the knobs will produce no effect; only the function knob remains active to allow you to return to the main menu. [. . . ] To install the oven seal: • Hook the clips in the 4 corners onto the oven seal. Oven seal maintenance tips The seal should be soft and elastic. • To keep the oven seal clean, use a nonabrasive sponge and lukewarm water to wash it. 7. Press the cover completely down so that it attaches perfectly to the bulb support. 38 Installation Fit the power line with an omnipolar circuit breaker in compliance with installation regulations. [. . . ]