User manual SMEG SFPA140

[. . . ] Contents 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 General safety instructions Manufacturer liability Appliance purpose Disposal Identification plate This user manual How to read the user manual General Description Control panel Other parts Available accessories Instructions First use Using the accessories Using the oven Cooking advice Special functions Preset recipes Personal recipes Settings 4 5 5 5 6 6 6 2 Description 7 7 8 8 9 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 3. 8 3. 9 11 11 11 12 14 18 24 27 33 36 4 Cleaning and maintenance 4. 1 Instructions 4. 2 Cleaning the surfaces 4. 3 Ordinary daily cleaning 4. 4 Food stains or residues 4. 5 Removing the door 4. 6 Cleaning the door glazing 4. 7 Removing the internal glass panels 4. 8 Cleaning the inside of the oven 4. 9 Vapor Clean: assisted oven cleaning (on some models only) 4. 10 Pyrolytic: automatic oven cleaning 4. 11 Extraordinary maintenance 38 38 38 38 38 38 39 39 40 42 45 48 5 Installation 5. 1 Electrical connection 5. 2 Cable replacement 5. 3 Positioning 50 50 50 51 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www. smeg. com 3 EN 1 Instructions 4 Instructions 1 Instructions 1. 1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Never touch the heating elements during use. • Keep children under eight years of age at a safe distance if they are not constantly supervised. [. . . ] If a function is activated after setting a minute minder time, this time will be automatically used as a minute minder for the function. This function only activates the buzzer, without stopping cooking. 2. Select “food warming” from the special functions menu. 3. Press the function. symbol to activate the It is possible to modify the cooking temperature by pressing it. Stack plates a maximum of 5/6 high. 26 Use This mode allows you to select a pre-set food cooking program. The appliance will automatically calculate the optimum cooking parameters based on the weight entered. 4. Select the weight of the dish to cook. Starting a program 1. Select the required program; use the and cursors to scroll through the list of available programs. At this point it is possible to start the selected program, permanently change the settings or delay the cooking. 2. Select the sub-category of dish to cook. 27 EN 3. 7 Preset recipes 3. Select the type of cooking (where possible, based on the dish chosen) Use 6. If you choose the “Start” option, cooking will start with the program's predefined settings and the display will show all the parameters set. When the program has finished, the appliance will warn the user with buzzers and the flashing symbol. The time shown does not include the time to reach temperature. Once the set temperature has been reached, the cooking program will have the duration shown. A message will indicate when to place the food in the oven and enable the start of cooking. 2. Press the symbol to perform cooking with the same parameters currently set (press the symbol twice if the buzzer is active). The appliance will automatically restart cooking if it is at the correct temperature; otherwise it will also resume preheating. Cooking in sequence is useful to cook multiple dishes of the same type. For example, it can be used to cook several pizzas in a row. It is not recommended to place the dish in the oven during the automatic pre-heat stage. symbol to exit and finish the The predefined cooking parameters can be changed at any time, even after cooking has started. 28 Use 1. Select the program to change and the change option. [. . . ] Switch the oven off and on again, waiting a few minutes before selecting a new cleaning cycle. If the problem has not been resolved or in the case of other types of fault, contact your local technical support centre. If other Error XX error messages are indicated: note down the error message, function and set temperature and contact your local technical support centre. 49 EN What to do if. . . If the door is opened during a fan assisted function, the fan stops: • This is not a fault. It is a normal operation of the appliance, useful when cooking foods in order to avoid excessive heat escaping. When the door is closed, the oven will return to normal operation. Installation 5 Installation 5. 1 Electrical connection Power voltage Danger of electrocution • Have the electrical connection performed by authorised technical personnel. [. . . ]