User manual SMEG SIMU524B

[. . . ] All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING. € These words mean: DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. [. . . ] Melt can be turned off in 2 different ways: 1. Use the power slider to set to a heat level. For Optimum Results: ■■ ■■ ■■ Do not use a lid on the pot being used in conjunction with the Boiling Sensor function. Do not activate the Boiling Sensor function if the surface cooking area is already hot (“H” visible on display). The quality of the pot used may have a bearing on the Boiling Sensor function performance. Important Information: ■■ When the Bridge function is selected, the Performance Boost and Boiling Sensor functions cannot be used. if the Timer is set , it will be displayed alongside the surface cooking area display. The cooktop features automatic functions for each surface cooking area. The available functions are shown next to the selection keypad of each surface cooking area. Each time an automatic function is selected, an indicator light turns on next to the function and “A” appears in the surface cooking area display. The cooktop features automatic management of the use of the Boiling Sensor and Performance Boost function settings; therefore, in some cases it may not be possible to select the Performance Boost function when the Boiling Sensor function is selected on other surface cooking areas. Touch the Timer “+” keypad to increase the time in 1-minute increments. OR Touch the Timer “-” keypad to decrease the time in 1-minute increments. The timer will start to count down after a few seconds. To change the time, touch the Timer “+” or “-” keypads. When the countdown is finished, ”00” flashes and a tone will sound. NOTE: When the power is restored after an outage, the timers will no longer be running. 8 Tones Tones are audible signals, indicating the following: ■■ Use flat-bottomed cookware for best heat conduction and energy efficiency. Cookware with rounded, warped, ribbed or dented bottoms could cause uneven heating and poor cooking results. Determine flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware. Make sure the bottoms of pots and pans are clean and dry before using them. [. . . ] For your convenience, a label containing this information is supplied with this booklet. MOD:_____________________________________________________ S/N:_______________________________________________________ When writing or calling about a service problem, please include the following information: ■■ ■■ ■■ ■■ ■■ your name, address and telephone number appliance model and serial number name and address of your dealer a clear description of the problem you are having proof of purchase (sales receipt) SMEG BUILT-IN ELECTRIC COOKTOP WARRANTY FULL ONE-YEAR WARRANTY For one year from the date of the original purchase, SMEG USA, Inc. (“SMEG”) will repair or replace (at its option) any part of the cooktop which fails due to a defect in materials or workmanship. During this full one year warranty, SMEG will provide, free of charge, all labor and in-home service to repair or replace the defective part. [. . . ]