User manual SMEG SIMU536B

[. . . ] 5 Dual Size Surface Cooking Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Simmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Melt + Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The heat setting will appear in the surface cooking area display. The power slider consists of 9 positions plus a “Boost” position. When the user slides to 0, “0” will be displayed. The surface cooking area will not turn on but remains active/ selected. When a surface cooking area is left at the “0” power level for 1 minute, the zone will automatically turn off and display only the middle dash without the indicator light. Use the following chart as a guide when setting heat levels. SETTING 9 - Boost 9 7-8 6-7 5-6 RECOMMENDED USE ■ Bring liquid to a boil. ■ Range of simmer levels for simmering with or without a lid. 2. Slide a finger on the Heat Level Slider to change the power level up or down. The selected heat level will show in the heat level display for each surface cooking area using the bridge. To Use To Turn On: 1. Check that a surface cooking area has been selected. “A” will appear in the display, and the indicator light next to Simmer will light. If you attempt to use another surface cooking area in the same zone, “P” and “9” will briefly flash in the display before returning to heat setting level 9. The surface cooking area that was set to the Performance Boost function will automatically reset to heat setting level 9. See the following illustrations for zones. A D 36" (91. 4 cm) SIMU536 Perfomance Boost can be used on all surface cooking areas at the same time. A C D P P P P P P P OFF OFF OFF SIM SIM MELT MELT SIM MELT SIM SIM MELT OFF P P MELT OFF TIMER Power Simmer Melt B B Control Lock OFF OFF SIM MELT SIM MELT B B E SIM MELT OFF SIM MELT OFF TIMER Power Simmer Melt Control Lock Zone 1 A. Surface cooking area 3, dual element with performance boost Zone 3 D. Surface cooking area 5 B C Zone 1 A. Surface cooking area 4 To Use: 1. Check that a surface cooking area has been selected. “P” will appear in the display. The “P” will no longer be visible in the display, and the Performance Boost function will no longer be active. The surface cooking area turns back to heat setting level 9. NOTE: The Performance Boost function may automatically deactivate to keep the internal electronic components of the cooktop from becoming too hot. Timer Use the cooking timer to set times up to 90 minutes. The timer is independent of any other control settings. [. . . ] Call customer service. C81, C82, C83 The surface cooking area has overheated. F12, F21, F25, F36, F37, F40, F47, F56, F58, 560, F61, F62, F63, F64 11 Please record your model (MOD) and serial number (S/N) below for future reference. For your convenience, a label containing this information is supplied with this booklet. When writing or calling about a service problem, please include the following information: - your name, address and telephone number - appliance model and serial number - name and address of your dealer - a clear description of the problem you are having - proof of purchase (sales receipt) SMEG BUILT-IN ELECTRIC COOKTOP WARRANTY FULL ONE-YEAR WARRANTY For one year from the date of the original purchase, SMEG USA, Inc. ("SMEG") will repair or replace (at its option) any part of the cooktop which fails due to a defect in materials or workmanship. [. . . ]