User manual SMEG SLV129ED

[. . . ] Do not operate damaged machines or machines with opened package. • Have your machine installed only by authorized service. Any interference to your machine by anyone other than authorized services shall cause your warranty to be void. • The appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] In case yuo put approximately half or less amount of launderies of maximum laundry capacity in your machine, your machine will run so as to save washing time, water consumption and energy in some programmes. When the halfload function is active, the machine can complete the programme you have set in a shorter time. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (OPERATING YOUR MACHINE) 45 TWINJET SYSTEM Detergent water in your machine will be circulated with 2 water injection mechanisms and a mixing system via twinjet system. Circulated detergent water will be injected over your laundries, which allows a better washing performance. Twinjet system will help you wash higher amount of laundries in a shorter time with a better washing performance, guaranteeing less energy and water consumption. Twinjet unit Pump unit CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS 46 1- Temperature selection You can select the washing water temperature with the washing water temperature adjustment button. Whenever you select a new programme, the maximum washing water temperature is shown on the washing water temperature display. You can gradually decrease the washing water temperature between the maximum temperature and cold washing (--) by pressing washing water temperature adjustment button. If you have missed the washing water temperature you wanted, you can return to the intended temperature by continuously pressing the washing water temperature adjustment button. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING AUXILIARY FUNCTIONS 47 2- Spin speed selection You can set the spin revolution for your laundries via revolution speed setting button. When you select a new programme, the maximum spin revolution speed of the programme you have selected will be viewed on the display of revolution speed. You can gradually reduce the revolution speed between cancel spinning (-) options through the maximum spin revolution of the programme selected by pressing revolution speed setting button. If you have skipped the spinning revolution you want to set, you can re-switch to the revolution by keeping the revolution setting button pressed. CHAPTER-5: PRELIMINARY PREPARATION FOR LAUNDERING (AUXILIARY FUNCTIONS) 48 3- Delay Timer function By using this auxiliary function, you can let your machine start washing after 30 minutes to 23 hours. To use auxiliary function of delay timer: - Press time delay button once. - Expression of “0. 5h” will appear on the display. Main symbol explanations 12Start/Pause symbol / Door lock active/ Door lock not active 3Washing Programme remaining duration and delayed start remaining duration 4567891011Delayed Start symbol Extra rinsing and anti allergic auxiliary function symbol Pump malfunction symbol Water cut off malfunction symbol Stain level symbol Wringing speed indicator symbol Economic washing temperature indicator symbol Washing temperature indicator symbol CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (CHILD LOCK) 54 To avoid programme flow from being affected if programme buttons are pressed or programme button is turned when performing washing operation in your machine, child lock is available. Child lock will be activated in case pressed on both auxiliary functions 4 and 5 at the same time for more than 5 seconds. Y ‘’CL’’ symbol will flash on the electronic display when activated. If pressed any button while child lock is active, the “CL” symbol will blink on the electronic display. If while the child lock is engaged and any programme is running, the programme knob is switched to the CANCEL position and another programme is selected, the programme previously selected continues from where it left. To deactivate it, it will be sufficient to press on the same buttons for more than 5 seconds. When the child lock is deactivated, the “CL” symbol on the electronic display will go off. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING (CANCELLING PROGRAMME) 55 If you want to cancel any programme running: 1- Switch the programme knob to “CANCEL” position. 2- Your machine will stop the washing operation and the programme will be cancelled. 3- To get rid of the water accumulated in the machine switch the programme knob to any programme. 4- Your machine will perform the necessary discharge operation and cancel the programme. 5- You can run your machine by selecting a new programme. CHAPTER -5: PRELIMINARY PREPARATION FOR LAUNDERING FINISHING PROGRAMME 56 Your machine will stop by itself as soon as the programme you have selected finishes. - The expression of “END” will light on the electronic display for 2 minutes. [. . . ] In case the type of your laundry permits, wash with bleacher. Chocolate and cocoa: After submerging your laundries in cold water and rubbing it using soap or detergent, wash it in temperature that fabric type of your laundry can resist. In case the oil stain is still visible, wipe with oxygen water (3%). CHAPTER -12: PRACTICAL INFORMATION 81 Tomato paste: After rubbing out the dried substances without damaging your laundry, submerge it in water for 30 minutes, and then scrub and wash it with detergent. Bouillon-Egg: Remove dried spot residues on your laundry, and then wipe it with a sponge or soft cloth submerged in cold water previously. Scrub with detergent, wash with diluted bleacher. [. . . ]