User manual SMEG SM807ATF

[. . . ] 31 USING THE OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 CLEANING AND MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 EXTRAORDINARY MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 OVEN INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Adequate differentiated collection for the subsequent forwarding of the decommissioned product to recycling, processing and ecologically compatible disposal contributes to avoiding possible negative effects on the environment and on health, and promotes recycling of the appliances constituent materials. The illicit disposal of the product by the user results in the application of administrative sanctions. The product does not contain substances in quantities sufficient to be considered hazardous to health and the environment, in accordance with current European directives. 3. 2 Your environmental responsibility Our product's packing is made of non-polluting materials, which are therefore compatible with the environment and recyclable. Please help by disposing of the packaging correctly. You can obtain the addresses of collection, recycling and disposal centres from your retailer or from the competent local organisations. Do not discard the packaging or any part of it, or leave it unattended. It can constitute a suffocation hazard for children, especially the plastic bags. Your old appliance also needs to be disposed of correctly. Important: hand over your appliance to the local agency authorised for the collection of electrical appliances no longer in use. Correct disposal enables intelligent recovery of valuable materials. Before disposing of your appliance it is important to remove doors and leave shelves in the same position as for use, to ensure that children cannot accidentally become trapped inside during play. At the end, a beep and the text "End" flashing (for 20 minutes) will indicate that cooking has been completed. To return to the "OFF" status keep the "STOP" button pressed for 4 seconds. From the "OFF" status proceed as follows: 2 3 4 5 6 7 34 Instructions for the user 5. 4. 1 Extending a cooking operation When a cooking operation finishes, it is possible to extend it manually: 1 While the display is showing the message "End", press the "START" button; the text "tP00" will appear on the display. 2 3 Turn the knob to the or symbols to set the additional minutes of cooking; at most 20 extra minutes are allowed. To start cooking with the extra time that has just been set, press the "START" button for at least 2 seconds. A buzzer will sound to indicate the restart of the cooking process. At the end of cooking, the text "End" will continue to flash for the next 20 minutes and the oven light will remain on. 4 5. 4. 2 Modifying a program during cooking The program can be modified during cooking: 1 Press the "PUSH" knob: the display will show the cooking temperature. 2 Modify the settings as described in points 3 - 8 of paragraph "5. 3 Editing / saving a program". Settings modified during cooking are not stored. 3 3 seconds after the most recent change, the program exits its modification status, saving the settings (the parameters modified as described in this paragraph only remain stored until the end of cooking). 35 Instructions for the user 5. 5 Manual cooking The manual program is "P40" and can be edited by the user, but does not save the cooking parameters set in memory. To select this program proceed as follows: · Save the program temporarily, as described in chapter 5. 3 Editing / saving a program. Unlike saved programs, the cooking time can even be set to infinite; the display will show the text "InF". · After saving it, do NOT return to the "OFF" condition. [. . . ] Then remove the bulb cover using a tool (e. g. a screwdriver). Remove the bulb by unscrewing it as shown. Replace the bulb with one of the same type (25W). Replace the cover correctly, so that the moulded part of the glass is facing the door. Use oven bulbs only (T 300°C). 42 Instructions for the user 7. 2 Removing the door Open the door completely. [. . . ]