User manual SMEG SNL926MA9

[. . . ] Open the hood upper glass panel (Fig. 1). [. . . ] Fig. 1 Fig. 4 Get the glass panel with no logo and place it near the hood 2, centre the four pins in the remaining four hood seats (Fig. 4). (2) For proper positioning, check the position of the metal frame on the back (Fig. 4. 1). Fig. 4. 1 ­ Rear view. Take the glass panel with the SMEG logo close to the hood and centre the four hinges in their seats (Fig. 2). Let the glass panel slide downwards along the pin guides (Fig. 3. 2). Adjust the closing position of the glass by loosening/tightening the adjustment screws. Fig. 11 Rotate the panels and take them close to the hood (Fig. 11 and Fig, 12). Use a size-3 Allen key for the adjustment (Fig. 13). Fig. 12 EN 05 EN 06 Installation instructions Height of the holes for the bracket Reference height for the center of the exhaust hole Level of the hob Fig. 14 Fig. 15 a) Fix the hood in the center over the hob; b) Maintain the distances shown at fig. [. . . ] Fig. 11 Rotate the panels and take them close to the hood (Fig. 11 and Fig, 12). [. . . ]