User manual SMEG SR134ATFS

[. . . ] GETTING TO KNOW YOUR COOKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEFORE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DESCRIPTION OF FRONT PANEL CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USING THE HOB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Flashes at regular intervals to indicate that the temperature inside the oven is being kept constantly at the set level. FUNCTION SELECTOR KNOB The electric oven's various functions are suitable for different cooking modes. After selecting the function required, set the cooking temperature using the thermostat knob. TOP AND BOTTOM HEATING ELEMENTS GRILL ELEMENT + FAN GRILL BOTTOM HEATING ELEMENT + FAN GRILL ELEMENT + ROTISSERIE FAN HEATING ELEMENT BOTTOM HEATING ELEMENT TOP + BOTTOM HEATING ELEMENTS + FAN HEATING ELEMENT AUTOMATIC CLEANING CYCLE (PYROLYSIS) TOP AND BOTTOM HEATING ELEMENTS + FAN FUNCTION DOOR INTERLOCK WARNING LIGHT During the automatic (Pyrolysis) oven cleaning cycle, this light comes on to indicate that the oven door interlock has been activated. 49 Instructions for the User 8. USING THE HOB 8. 1 Cooking zones The appliance is equipped with 4 cooking zones having different diameters and powers. Their positions are clearly marked by rings and heating only occurs inside the diameters marked on the ceramic hob. The 4 cooking zones are of HIGH-LIGHT type and start to heat up a few seconds after they are switched on. The heat level can be adjusted from the minimum to the maximum settings using the knobs on the front panel. Underneath each cooking zone there is a coil called an inductor, supplied with power by an electronic system, which generates a variable magnetic field. When a pan is placed inside this magnetic field, the high-frequency currents concentrate directly on the bottom of the pan and produce the heat needed to cook the foods. When the hob is used for the first time, it should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process, which might contaminate foods with unpleasant smells. 8. 1. 1 Operating Powers The table below lists the consumption levels of the cooking zones when in operation. Zone number: Zone diameter Power absorption Normal operation: 1400 W 1 145 mm With Power function 1800 W Normal operation: 1850 W 2 180 mm With Power function 2300 W Normal operation: 2300 W 3 210 mm With Power function 3200 W Normal operation: 1400 W 4 145 mm With Power function 1800 W Total absorbed power: 7400 W When the hob is used for the first time, it should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process, which might contaminate foods with unpleasant smells. If the temperature should exceed preset values, the device will trigger specific functions to reduce the temperature and allow the ceramic hob to keep operating correctly. The following table lists the automatically triggered procedures and the relative trigger temperature: Operation Trigger temperature Operating power is reduced from Power function to 9 250° C Operating power is reduced by one point 280° C Cooking zone switches off 300° C Power returns to set value 250° C The power displays on the hob flash to signal all operations of this kind. Warning: do not spill sugar or sugar mixtures onto the hob when hot. Do not place materials or substances which might melt (plastic or aluminium foil) on the hob. If this should occur, to prevent damage to the hob's surface, switch it off immediately and remove the melted material with the scraper provided while the hob is still warm. If the ceramic hob is not cleaned immediately, residues may form which cannot be removed once the hob has cooled. Important Keep a close eye on children because they are unlikely to see the residual heat warning lights on the hob. The cooking zones are still hot for some time after use, even if they are switched off. Make sure that children never touch the hob. Operation 8. 2 Holding Function The holding function keeps the temperature of the bottoms of pans at about 65°C. This allows foods to be kept hot with optimal energy consumption and to be heated gently. [. . . ] Keep children at a safe distance and take care, especially if the cycle is set to start with a delay. 59 Instructions for the User 13. EXTRAORDINARY MAINTENANCE Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below. Before carrying out any operations, disconnect the appliance from the electricity supply. 13. 1 Changing the light bulb Remove the protective cover A by unscrewing it clockwise; replace the bulb B with another of the same type (25 W). Replace the protective cover A. Use only light bulbs approved for ovens (T 300°C). 13. 2 Removing the door Fully open the door and turn the hinges A to the limit with the aid of a thin-tip screwdriver. [. . . ]