User manual SMEG STLA825B-1

[. . . ] Recommendations are given for the correct use of the baskets, spray arms, containers, filters, washing programs, and for operating the controls. Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term. This user-friendly manual will provide answers to all your questions about use of the dishwasher. INSTALLATION INSTRUCTIONS: these are intended for the qualified technician who must carry out the installation, hook-up and testing of the appliance. USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures. 1 Safety instructions 1. [. . . ] If, on the other hand, the dishes are sticky or have white streaks, it is necessary to reduce the rinse aid setting. 20 User instructions ADDING THE DETERGENT To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully. During the washing cycle, the dispenser will be opened automatically. When a program with hot prewash is selected (see program table), extra detergent must be placed in the cavity G/H (depending on models). Use only detergents specially formulated for dishwashers. For optimal washing results it is important to use a good quality detergent. The detergent packs must be sealed and stored in a dry place to prevent the formation of lumps which may negatively affect washing results. Once opened the detergent packs should not be kept for too long, otherwise the detergent loses its effectiveness. Do not use detergents formulated for washing dishes by hand, because they produce a great deal of foam and may negatively affect the operation of the dishwasher. An insufficient amount of detergent will result in a partial removal of dirt from the dishes, whereas an excessive amount is wasteful and does not improve the washing results. 21 User instructions The market offers liquid and powder detergents with differing chemical compositions, which may contain phosphates, or be phosphate-free but contain natural enzymes. - Detergents containing phosphates are more effective against grease and starch at temperatures above 60C. - Enzyme detergents, on the other hand, are also effective at lower temperatures (from 40 to 55C) and are more easily biodegradable. The relatively high water temperatures and the detergents used may damage them. Plastic dishes: heat resistant plastic dishes must be washed in the upper basket. Dishes and objects in copper, tin, zinc or brass: these tend to stain. Aluminium dishes: items made from anodised aluminium may lose their colour. Glass and crystal: in general, glass and crystal objects can be washed in the dishwasher. However, certain types of glass and crystal may become dull and lose their clearness after many washings. Therefore, for these items we recommend using the least aggressive program available. Decorated items: the decorated objects available on the market are generally able to withstand washing in the dishwasher, although the colours may fade after a great many washes. If in doubt as to the fastness of the colours, it is advisable to wash just a few items at a time for approximately one month. 24 User instructions 4. 4 Using the baskets The dishwasher has a capacity of 14 place-settings, including serving dishes. LOWER BASKET The lower basket receives the full force of the lower spray arm, and should therefore be used for the "toughest" items with a heavier degree of soiling. All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom. The rear of the basket is fitted with a rack to take large plates (A). [. . . ] WARNING: Standard installation is recommended. In case of customised installation (distance "B") present, lightweight door panels ( 8. 5 kg) should be used. DISTANCE "B" Modello Model STL867A Quota "A" Distance "A" Min. 840 881 STLA868A 840 881 STL827A 800 841 FILO SUPERIORE FRONTALINO TOP EDGE OF CONTROL PANEL Max. 880 885 880 885 840 845 840 845 800 800 Spessore Thickness 3 2, 5 3 2, 5 3 2, 5 3 2, 5 3 3 Peso Weight 2, 5-9 2, 5-9 2, 5-9 FILO SUPERIORE DIMA TOP EDGE OF TEMPLATE QUOTA "B" STLA828A 800 841 2, 5-9 STL827B STLA825B-1 760 760 2, 5-9 2, 5-9 FAR COINCIDERE IL FILO SUPERIORE DIMA CON IL FILO SUPERIORE FRONTALINO POSITION THE TEMPLATE AT DISTANCE "B" ALIGN THE TOP EDGE OF THE TEMPLATE WITH THE TOP EDGE OF THE CONTROL PANEL QUOTA "A" DISTANCE "A" POSIZIONARE LA DIMA ALLA QUOTA "B" QUOTA "A" - DISTANCE "A" 25 mm. Min. 25 mm. Min. INSTALLAZIONE PERSONALIZZATA CUSTOMISED INSTALLATION INSTALLAZIONE STANDARD STANDARD INSTALLATION Fig. [. . . ]