User manual SMEG SW86

[. . . ] SW86 SW106 Washing Machine Lavatrice 1 Important safety instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. installation, maintenance, cleaning and repairing procedures. General safety with physical, sensory or mental disorders or unlearned or inexperienced people (including will instruct them accordingly for use of the product. machine will cause electrical parts to overheat. [. . . ] Use the dosages recommended on the When using a programme without prewash, package. do not put any detergent into the prewash If the liquid detergent has lost its fluidity, dilute compartment (compartment nr. it with water before putting in the detergent In a programme with prewash, do not cup. put liquid detergent into the prewash 6 EN This will reduce pilling. Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the machine. Such dusts and powders on the laundry may build up on the inner parts of the machine in time and can cause damage. mixing them. use it for coloured clothes. If the product does not contain a liquid detergent cup: a programme with prewash. cup and follow the instructions on the package. follow the instructions on the package and select a programme that washes at a lower temperature. with detergents; however, if its thickness is not the same with the detergent, put the in the detergent drawer and wait until the detergent flows while the machine is taking in Using gel and tablet detergent the manufacturer's instructions on the detergent there is not any instruction on the package, apply the following. detergent cup, put the gel detergent into the main wash detergent compartment during first detergent cup, fill the detergent into this cup compartment while the machine is still taking in water. Using limescale remover manufactured specifically for washing machines only. C C the drum in future washings. selecting the prewash function. Using starch dyestuff into the softener compartment as instructed on the package. As an alternative application, select a programme with extra rinse and add taking water from the detergent compartment during first rinsing step. 7 EN Tips for efficient washing Clothes Light colours and whites (Recommended temperature range Colors Dark colors Delicates/ Woolens/Silks (Recommended temperature range (Recommended (Recommended temperature range stains of perform prewash. Powder Heavily Soiled recommended Powder and recommended for dosages recommended for heavily soiled clothes. colours and dark used at dosages recommended for heavily soiled clothes. detergents produced for delicate clothes. Woollen and silk clothes must special woollen detergents. (difficult stains used at dosages such as grass, recommended for powder detergents to coffee, fruits and heavily soiled clothes. the machine as soon as you see the drum rotating. C Temperature selection C A Additional programmes may differ according to the model of the machine. To prevent damage on your laundry, do not select a temperature that exceeds the one recommended for your laundry in the Spin speed selection spin compared to the Synthetics programme. recommended speed for the selected programme. washes laundry with a very gentle washing action to not to damage clothes. [. . . ] Never force the filter while installing it into its housing. Seat the filter into its leak from the filter cap. their places first, and then press the upper part to close. EN 6 Technical specifications Models (EN) Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg. ) Electrical input (V/Hz) Total current (A) Total power (W) Spin speed (rpm max. ) Stand-by mode power (W) Off-mode power (W) SW86 6 84 60 48 59 SW106 6 84 60 48 59 220-240 V / 50Hz 10 10 2000-2350 800 1. 00 0. 25 2000-2350 1000 1. 00 0. 25 Technical specifications may be changed without prior notice to improve the quality of the product. Figures in this manual are schematic and may not match the product exactly. Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. [. . . ]