User manual SMEG W74EB/1

[. . . ] 29 USING THE OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 CLEANING AND MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 EXTRAORDINARY MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 OVEN INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ENVIRONMENTAL CARE 3. 1 Our environmental care Pursuant to Directives 2002/95/EC, 2002/96/EC and 2003/108/EC relating to the reduction of the use of hazardous substances in electrical and electronic appliances, as well as to the disposal of refuse, the crossed out bin symbol on the appliance indicates that the product, at the end of its working life, must be collected separately from other refuse. Therefore, the user must consign the product that has reached the end of its working life to the appropriate selective collection centres for electrical and electronic refuse, or deliver it back to the retailer when purchasing an equivalent product, on a one for one basis. Adequate selective collection for the subsequent forwarding of the decommissioned product to recycling, treatment and ecologically compatible disposal contributes to avoiding possible negative effects on the environment and on health and promotes the recycling of the materials of which the appliance consists. Illicit disposal of the product by the user will lead to the application of administrative sanctions. The product does not contain substances in quantities sufficient to be considered hazardous to health and the environment, in accordance with current European directives. 3. 2 Your environmental care Our product's packaging is made of non-polluting materials, therefore compatible with the environment and recyclable. Please help by disposing of the packaging correctly. You can obtain the addresses of collection, recycling and disposal centres from your retailer or from the competent local organisations. Do not discard the packaging or any part of it, or leave it unattended. It can constitute a suffocation hazard for children, especially the plastic bags. Your old appliance also needs to be disposed of correctly. Important: hand over your appliance to the local agency authorised for the collection of electrical appliances no longer in use. To start cooking, keep the "START" button pressed for 2 seconds. The display will show the set parameters in sequence, the time remaining until the end of cooking and the program selected. It is possible to start cooking early before the preheating temperature is reached, by keeping the "START" button pressed for 3 seconds. During the last minute of cooking, only the countdown of the remaining 60 seconds will be displayed. At the end, a buzzer will sound and the flashing "End" text (for 20 minutes) will indicate that cooking has been completed. To return to the "OFF" status keep the "STOP" button pressed for 4 seconds. 2 3 4 5 6 7 32 Instructions for the user 5. 4. 1 Extending a cooking operation When a cooking operation finishes, it is possible to extend it manually: 1 While the display is showing "End", press the "START" button; "tP00" will appear on the display. 2 3 4 Turn the knob to the or symbol to set the additional minutes of cooking; at most 20 extra minutes are allowed. To start cooking with the extra time that has just been set, press the "START" button for at least 2 seconds. When cooking resumes, a buzzer will sound. At the end of cooking, "End" will continue to flash for the next 20 minutes and the oven light will remain on. 5. 4. 2 Modifying a program during cooking The program can be modified during cooking: 1 Press the "PUSH" knob: the display will show the cooking temperature. 2 Modify the settings as described in points 3 - 8 of paragraph "5. 3 Editing / saving a program". [. . . ] Then remove the bulb cover using a tool (e. g. a screwdriver). Remove the bulb by unscrewing it as shown. The bulbs are halogen bulbs, so do not touch them directly with your fingers; wrap them in insulating material instead. Replace the bulb with one of the same type (40W). [. . . ]