User manual SMEG WF710/1

[. . . ] 35 DESCRIPTION OF FRONT PANEL CONTROLS . . . . . . . . . . . . . . . . . . . . . . 36 USING THE OVEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ACCESSORIES AVAILABLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 RECOMMENDED COOKING TABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 CLEANING AND MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] PT1 can also be held in the left or right position to increase or decrease the setting more quickly. 7. 5 Programmed cooking procedures 7. 5. 1 Timed cooking with minute minder From ON status (see point "7. 2 Operating modes"), press PT1 once. The display will show the figures (constantly on) and the symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 23:59). A few seconds later, the symbol will stop flashing, and the countdown will start from that moment. Now you can also select the cooking function required and wait for the buzzer to sound, indicating that the cooking time is over. You can now set an additional cooking time by turning PT1, or return to display of the current time by pressing PT1 twice. Turn PT2 to the "0" symbol to switch the oven off completely. The minute minder also works with no function set. 39 Instructions for the User Warning: the minute minder does not stop the cooking process. It only warns the user that the preset number of minutes have passed. To switch the oven off completely, turn PT2 to the "0" symbol. Modifying the data set Once the countdown has started, its duration can be changed while cooking is in progress. (P2: OF / ON) Activate or deactivate the Show Room function, which disables all the heating elements so that only the control panel works. To allow the oven to be used normally, P2:OFF must be set. 3 (P3: OF / ON) Activate or deactivate the function which limits the maximum power absorption to 2300 W. When the child safety lock is activated (P1:ON), if a knob is turned "bLOC" appears on DSP1 for 2 seconds. Operating PT2 also triggers the "bLOC" alarm until the function originally selected is restored. 4 42 Instructions for the User 7. 6. 1 Modifying the secondary menu settings The secondary menu appears the first time the appliance is used or after a power blackout, or can be accessed by keeping PT1 depressed for 3 seconds with the oven in OFF status (see point "7. 2 Operating modes"). Changing the settings of the secondary menu parameters is very easy. Refer to the chart below: MENU MODIFICATION PROCEDURE SYMBOLS Turn PT1 to the right to increase (+) the value or set ON status. Turn PT1 to the left to decrease (-) the value or set Off status. Press PT1 to move on to setting next of the parameter in the menu. After setting P3, pressing PT1 returns to normal oven operation. 43 Instructions for the User 7. 7 Cooling fan system The appliance is equipped with a cooling system which comes into operation as soon as a cooking function or a cleaning cycle (Pyrolysis) starts. Operation of the fans generates a normal air flow which comes out above and underneath the door and may continue for a short time even after the oven is switched off. 7. 8 Inside light The oven light comes on: · when the oven door is opened in OFF status (point "7. 2 Operating modes") or · when the function knob is turned to any function, except and . 44 Instructions for the User 8. ACCESSORIES AVAILABLE The oven is fitted with 4 runners for placing trays and shelves at different heights. Shelf: useful to support pans containing the food for cooking. Tray grid: for placing on top of a tray for cooking foods which may drip. Oven tray: useful for collecting fat from foods placed on the grid above. [. . . ] 11. 2. 2 Removing doors with pins Open the door completely and insert the pins (supplied) into the holes from the inside. Close the door to an angle of about 45° and lift it off. To reassemble, fit the hinges into their grooves, then lower the door into place and extract the pins. 11. 3 Removing the gasket To allow thorough cleaning of the oven, the door gasket can be removed. 55 Instructions for the User 11. 4 Removing the inside glass with the door cold The glass in the door should always be kept thoroughly clean. For easier cleaning, the door glazing can be fully removed by proceeding as described below. [. . . ]