User manual SMEG WHT712EIN

[. . . ] u Unplug the product if it is not in use. u Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons. u The water supply and draining hoses must be securely fastened and remain undamaged. [. . . ] Use this programme to wash delicates such as underwears. If there is little amount of laundry, use a laundry net. • Spin+Drain Use to drain the water in the machine. 40 / EN Washing Machine / User’s Manual 4. 3. 4 Temperature selection Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually. 4. 3. 5 Spin speed selection C If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode. Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator. To decrease the spin speed, press the Spin Speed Adjustment button. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function selection" section for explanations of these options. Rinse Hold If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water. If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button. Not using the Prewash will save energy, water, detergent and time. • Quick This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the number of rinsing steps for lightly soiled laundry. • Extra Rinse C When you select this function, load your machine with half of the maximum laundry specified in the programme table. This function enables the machine to make another rinsing in addition to the one already made after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc. ) to be effected by the minimal detergent remnants on the laundry can be reduced. 4. 3. 8 End Time With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time indicator is illuminated. In order for the End Time function to be activated and the programme to be completed at the end of the specified time, you must press Start / Pause button after adjusting the time. If you want to cancel End Time function, press On / Off button to turn off and on the machine. 1 Open the loading door, place the laundry and put detergent, etc. 2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions. 3 Set the end time of your choice by pressing the End Time button. “:” sign in the middle of the end time on the display starts flashing. C C Do not use liquid detergents when you activate End Time function! [. . . ] • Use detergents appropriate for the washing machine. • Use only sufficient amount of detergent. • Store detergent in a closed and dry location. • Use smaller amounts of detergent for this type of item. [. . . ]