User manual SMEG WHT814EES

[. . . ] 1 General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. 1. 1 Life and property safety u Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. This will cause problems with your product. [. . . ] Temperature will decrease gradually. 4. 3. 5 Spin speed selection C C If the programme has not reached the heating step, you can change the temperature without switching the machine to Pause mode. Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the spin speed indicator. To decrease the spin speed, press the Spin Speed Adjustment button. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See "Auxiliary function selection" section for explanations of these options. If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause mode. Indicative values for Synthetics programmes (EN) Water Consumption (l) Programme Duration (min) * Energy Consumption (kWh) Remaining Moisture Content (%) ** Remaining Moisture Content (%) ** Load (kg) ≤ 1000 rpm > 1000 rpm Synthetics 60 Synthetics 40 3 3 64 64 1. 10 0. 61 01:57 01:57 45 45 40 40 * You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. ** Remaining moisture content values may differ according to the selected spin speed. Washing Machine / User’s Manual 41 / EN 4. 3. 6 Programme and consumption table EN 2 Energy Consumption (kWh) Water Consumption (l) Max. Speed*** Programme (°C) Antiarrugas Algodón ECO Antialérgico Camisas Mix Sport Cortinas Ropa Oscura Jeans Lencería Lavado a Mano Delicate 20° Rápido 14’ Lana Sintético Algodón 60** 60** 40** 90 60 40 40 40 40 40 30 30 20 30 40 60 40 90 60 40 8 4 4 8 4 4 4 2 4 4 1 1 3. 5 2 1. 5 3 3 8 8 8 53 45 44 90 61 60 65 72 60 60 52 40 45 35 49 64 64 77 77 77 1. 20 0. 63 0. 63 2. 40 1. 10 0. 70 0. 90 0. 60 0. 60 0. 65 0. 30 0. 25 0. 15 0. 15 0. 25 1. 10 0. 61 2. 20 1. 62 0. 87 1600 1600 1600 1400 800 1000 1000 800 1000 1000 1000 1200 1200 1400 1200 1200 1200 1600 1600 1600 Rinse Hold Prelavado Selectable temperature range °C Rápido • • • * • • • • • • * • • * • * • * * * • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Cold-60 Cold-60 Cold-60 90-30 Cold-60 Cold-40 Cold-40 Cold-40 Cold-40 Cold-60 Cold-30 Cold-30 20 Cold-30 Cold-40 Cold-60 Cold-60 Cold-90 Cold-90 Cold-90 • * ** *** **** - : Selectable. : Energy Label programme (EN 60456 Ed. 3) : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. : Program will detect the type and amount of the laundry which you put into the machine and adjust the water consumption, energy consumption and program duration automatically. : See the programme description for maximum load. ** “Cotton eco 40°C and Cotton eco 60°C are standard programmes. ” These programmes are known as ‘40°C cotton standard programme’ and ‘60°C cotton standard programme’ and indicated with the  symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. You can see the washing time of the programme you have selected on the display of the machine. It is normal that small differences may occur between the time shown on the display and the real washing time. “Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed. ” “The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine. ” "The manufacturer reserves the right to make modifications in the programmes and auxiliary functions given in the table. While these modifications will not change the machine performance, programme steps and durations can be changed. " C 42 / EN Washing Machine / User’s Manual 4. 3. 7 Auxiliary function selection Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator light will illuminate. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme after the washing cycle starts. If the wash cycle has reached a point where no auxiliary function can be selected, an audio warning will be given and the related auxiliary function's light will flash. C C Indicator lights of the auxiliary functions that are not allowed to be selected with the current programme will flash and an audio warning is given. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be canceled and Quick Wash will remain active. [. . . ] ŠŠThere may be problem in the valves or in the detergent dispenser. Call the Authorized Service Agent. Pump filter is clogged. Insufficient amount of detergent is used. (**) Detergent is put in the wrong compartment. Detergent might be mixed with the softener. [. . . ]