User manual SMITH CORONA SPELLMATE

[. . . ] ;; ;; W My Most Popular Features Correcting Cassette Easy to change and snap into place. Automatic Memory Correction Instant correction. WordEraser Erases an entire word. Spell-Right Dictionary Identifies spelling errors. Self Demonstration. . . Activate this Self Demonstration Program and discover my most popular features. Follow the instructions below. Code + Demo Z 1. Release both. This User's Manual should be used with the following models: Spellmate 500 and Spellmate 700. Both the software contained in this model and this User's Manual are protected by Copyright Smith Corona Corporation, 1994. 2 Smith Corona Corporation Table of Contents Hardware Basics Typewriter Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] . Code Return Reloc Smith Corona Corporation 21 Word Swap ® Word Swap allows you to reverse the order of two words or group of alpha characters immediately adjacent to one another on a line within Correction Memory. For example: To or be not to be To be or not to be Words that are transposed must be separated by a single space. Characters such as a hyphen (-) and apostrophe (') are considered part of a word. If you use any other symbol at the end of a word or between words (such as a number, punctuation, etc. ), the Shift Lock light will flash to indicate an error. If you try to swap non-adjacent words, the Shift Lock light will flash. Press any key and the light will stop flashing. Words will maintain original upper/lower case status. For example: WORD great great WORD Bold and Underscore must be activated to swap words with these enhancements. NOTE: Words can only be up to 25 characters in length. To use Word Swap: Code Back Space , , 1. Press Back Space to any character in the second word. Press Code + to swap it with preceding word. The print hammer locates to the right of the rightmost word that was swapped. Press Code + Reloc (Return), if necessary, to relocate. Code Return Reloc 22 Smith Corona Corporation Off-Line Correction You can use the Off-Line Correction feature to correct several characters on previous lines. IMPORTANT: If End of Page Option is activated, do not use the platen knob when positioning the print hammer on the line where the error is located as the line count may be inaccurate. To correct an error not in the Correction Memory: 1. Press Code + Up (6), Down (7), or Return to position the print hammer on the line containing the incorrect character. Press Back Space or Spacebar to incorrect character. (See note next page for enhanced text. ) 3. Retype the incorrect character to remove it. Press Code + Reloc (Return), if necessary, to relocate. Reloc Position Print Hammer Code Correct Retype Incorrect Character Type Correct Character Code Return Forward Correct To correct several characters or words not in Correction Memory: 1. Press Code + Up (6), Down (7), or Return to position the print hammer on the line containing the incorrect characters or words. [. . . ] Box 2090 Cortland, New York 13045-0980 WARNING: Use Smith Corona "H" Series supplies. Use of non-Smith Corona (brand or manufactured) supplies or accessories will not (except as noted below) void this warranty. THE WARRANTY WILL BE VOID if the typewriter is damaged or rendered wholly or partially inoperable as a result of using a non-Smith Corona supply or accessory item(s). 44 Smith Corona Corporation FCC The following information is provided to you in accordance with the rules and regulations of the United States Federal Communications Commission. [. . . ]