User manual SOLAC AE2510

[. . . ] For safety reasons, if the power cord or the charger is damaged, it must be replaced by a technical service centre authorised by the manufacturer. Never use the broom or the plug with wet hands. Do not get the appliance wet or put it in water. Do not replace the nickel-cadmium batteries with non-rechargeable batteries. [. . . ] Uncharge the batteries completely now and then for maximum performance. 1 Insert the handle (1) in the opening on the main body of the broom (3) and fasten both parts together by tightening the fastening screw (15) with a coin. 2 Make sure the dust canister (6) and filters (9 and 10) are installed correctly. see the section titled Cleaning the dust canister and filters. 3 Insert the multi-purpose brush (11) into the suction nozzle and press it in until you hear a click. 5 Once you have finished cleaning, turn the broom off by sliding the on/off button (2) up. Important: After each use, place the broom on the charger (13) to keep the suction power at peak level. This makes sure the battery is fully charged ready for the next time it is used. CLEANING THE DUST CANISTER AND FILTERS Befote starting to clean and maintain the appliance, make sure you have unplugged the appliance. When the dust stored in the canister reaches the maximum level mark (8), you should empty the canister. To ensure the continued top-quality performance of your appliance, we recommend cleaning the canister and filters after each use. When you need to empty the dust canister, disconnect the appliance and proceed as follows: 1 Press the canister removal button (7) upwards and remove the canister. Shake the filter out in the rubbish bin or use a brush to clean it. Shake the filter out in the rubbish bin, banging it lightly against the sides of the bin until no more dust falls off. 4 Once you have removed the filters from the canister, empty the canister into the rubbish bin. 5 If it is excessively dirty, wash the dust canister and filters under running water with a gentle detergent. Important: make sure they are completely dry before fitting them back in the canister. 6 Insert the protective filter (9) in the dust canister, making sure the air inlet hole on the filter coincides with the air inlet nozzle on the canister. Push the filter into position in the canister. To do this, make sure the air inlet hole on the canister coincides with the suction nozzle hole. [. . . ] This product is guaranteed for two years from the date of sale against any faults due to manufacture or materials. These include labour costs and spare parts or the replacement of the appliance should either of the first two choices be impossible or impractical. The warranty shall be rendered null and void by any of the following: · If the corresponding bill of sale, receipt or delivery note is not provided or if the information on these documents is altered. If the appliance has been used for professional cleaning and not for domestic cleaning only. [. . . ]