User manual SOLAC AS3240

[. . . ] Before plugging the appliance into the mains, check that the indicated voltage is the same as in your home. Always unplug the appliance after use and before assembling or removing parts, and performing any maintenance or cleaning operations. also unplug it in the case of a power cut. The appliance must be switched off before plugging or unplugging it into the mains · do not use the cord to hang up the appliance. [. . . ] You can use it for all kinds of floors, given that it is retractable so that it can be adapted to the surface to be vacuumed. to change the cleaning position , press the brush button (28) with your foot. We recommend cleaning hard floors, wood and parquet with the fibre brush extended, and cleaning carpets and rugs with the fibre brush retracted. We recommend using it on both parquet and hard floors (tile, ceramic, marble, etc. Especially designed for sofas and all other upholstered surfaces. Simultaneously pull upwards or downwards on the top part until the desired tube length is reached. 5 Pull out the cord (2) to the yellow mark (ideal length). If necessary, the cord can be pulled out to the red mark, but not any further. 7 Turn on the vacuum by pressing the pedal switch (3), and adjust the suction power by opening or closing the regulator on the handle (14). (The suction power is decreased by opening the valve, and it is increased by closing the valve). You can also adjust the suction power using the electronic regulator (6). ) If you hear a sharp whistling sound that is different from the normal sound when using the vacuum, turn it off and unplug it. , When using the vacuum, pull it behind you as if it were a cart. The handle (9) can also be used to carry the vacuum cleaner. , This appliance has a position called the "horizontal parking" position, which can be conveniently used during stops while cleaning. To put it in this position, insert the hook of the telescopic tube in the groove (5) of the vacuum cleaner body (Figure 1). , If you wish, you can place the suction head (34) and the furniture brush (31) in the attachment holder (26). 8 When finished, switch the appliance off by pressing the On/Off button (3). unplug it , and press the button (8) to wind up the cord. Hold the cord plug in your hand to prevent it from banging against the vacuum cleaner housing. , To save space when the vacuum is stored, attach the telescopic tube to the body of the vacuum using the hook (26) (Figure 2). Be sure that dirt does not exceed this level. [. . . ] 3 Shake the HEPA protector filter over a rubbish bin, and bang it gently against the sides of the bin until no more dust falls off. 4 Rinse the HEPA protector filter in warm water, and allow it to dry completely. 5 Remove the motor protection filter (16), rinse it, and allow it to dry completely. ) Clean the appliance before using it for the first time, immediately after each use and After not using it for a long period of time. [. . . ]