User manual SOLAC AS3260

[. . . ] Before plugging the appliance into the mains, check that the indicated voltage is the same as in your home. Always unplug the appliance after use and before assembling or removing parts, and performing any maintenance or cleaning operations. also unplug it in the case of a power cut. The appliance must be switched off before plugging or unplugging it into the mains · do not use the cord to hang up the appliance. [. . . ] The length of the telescopic tube can be adjusted (17) by sliding the adjustment button (18) while moving both parts of the telescopic tube. 5 Pull the cord (6) out as far as the yellow mark (ideal length). If necessary, pull it out as far as the red mark, but no further. 7 Adjust the suction power by turning the power control (3) to the required power level (fig. ) For daily cleaning use the ECOPTIMA power range. It has sufficient suction power with minimum power consumption. If you need more suction power for carpets or very dirty surfaces, turn the power control to the MAX position. 8 Switch the vacuum cleaner on by pressing the foot button (5). ) You can also adjust the suction power by opening or closing the regulator on the handle (16). (Opening the valve reduces the power and closing it increases the power). ) If, while using the appliance, you hear a sharp whistle unlike the usual sound, turn it off and unplug it. check that the air intakes , outlets and filters are not blocked. If they are blocked, get rid of the cause of the blockage. ) Turn the air intake hose cover (10) anti-clockwise and check it is not blocked (fig. , While using the appliance, drag it along like a trolley. If you wish, you can use the handle (15) to carry the vacuum cleaner. , This appliance has a position known as "horizontal parking", which can be used for pausing from time to time during cleaning. This position is achieved by holding the telescopic tube by the hook in the groove (4) of the appliance body. , If you want, you can place the tip (14) and the furniture brush (28) in the accessoryholder. 9 Once you have finished, switch the appliance off by pressing the button (5). unplug it and press the button (2) to wind up the cord. Hold the cord plug in your hand to prevent it from banging against the vacuum cleaner housing. [. . . ] Never use the vacuum cleaner without the air outlet filter. Position the mark on the cover facing the mark and turn clockwise to mark . ) Clean the appliance before using it for the first time, immediately after each use and After not using it for a long period of time. You will thus ensure the correct operation of the appliance and prolong its useful life. [. . . ]