User manual SOLAC CA4815

[. . . ] Thank you for choosing this Solac product and for placing your trust in our brand. This super-automatic coffee-maker has a maximum performance pressure pump (18 Bar) to offer you the best professional espresso coffee in the comfort of your home. With the touchscreen technology, you can easily select the espresso you prefer by pressing directly on the digital screen. This high-tech coffee-maker will tell you at any given moment which selection you have made and what it is making by means of graphic messages. [. . . ] The hot water symbol will appear inside a square frame. The frame around the steam symbol will light up. Close it when you have obtained sufficient hot water. Remove the glass or cup filled with hot water. The coffee-maker is ready to make coffee. When the coffee-maker is ready to obtain steam, the steam symbol is displayed on the screen: Place a container under the steam nozzle and open it by turning the steam regulator clockwise to empty any possible residual water that may have been left in the steam nozzle. Close the steam nozzle and throw the water away. Position the cup or jug with the liquid that is to be heated up. to obtain steam , turn the steam regulator anticlockwise. Close the steam regulator when you have finished heating up the liquid. To heat up the milk and make it frothy, move the cup or jug in circles. Remove the cup or jug with the heated liquid or frothy milk. This automatic process takes approximately 25 seconds, during which water is expelled through the coffee outlet. Move the cup in circles to heat the milk evenly. The coffee-maker is ready to make coffee. After heating the milk and making it frothy, close the steam outlet. If you exit the lime scale removal process once it has begun, press the ESC button for the programme to continue the rinse cycle. This will prevent traces of the removal agent remaining inside the appliance. Once the lime scale removal process has been confirmed, the coffee-maker will indicate that the process is starting on the screen. Once the lime scale removal process has finished, the system must be rinsed to make sure that all remains of the removal agent are removed. After the rinse process, the coffee-maker is ready to make coffee. The `no water' icon may appear during the lime scale removal and rinse processes. [. . . ] You have put the ground coffee in the dispenser when the coffee-maker was switched off. Clean the ground coffee from the dispenser. Repeat the operation, first of all pressing the button. CAUSE Part of the ground coffee may have been left in the inlet. [. . . ]