User manual SOLAC CH6350

[. . . ] You will thus be helping to take care of the environment. position (see "Using the Steamer"). Move the selector control (6) back to the OFF position (o) and fill the tank with the required amount of water. WARNING • This appliance is intended to be used in household applications such as: staff kitchen areas in shops; offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. [. . . ] ZTo foam the hot liquid, introduce only the tip of the steamer into the jug. To do so: unscrew the cover (1) by turning it anti-clockwise. 2 Using the jug (13), pour the required amount of water into the fill opening (2). I The amount of water required to heat a cup (200-250 cc) is approximately 40 cc. 3 Screw the cover (1) back on to seal the tank. 4 Plug the coffee maker into the mains using the power cord (15). 5 Move the OFF/COFFEE/STEAM selector (6) into the STEAM position (fig. I The red indicator light (3) will come on, indicating that the coffee maker is in operation. The steam will be available in approximately three minutes. 6 Insert the steam nozzle (4) into the jug or receptacle that contains the liquid to be heated. 7 To increase the steam flow rate, turn the selector control (6) to its fully open position. 8 Once the liquid has been heated to the desired temperature, allow some steam to flow out for a moment to clean the openings. To do so, move the selector control (6) to the COFFEE position. Water will come out through the filter holder. 10 Turn the selector control (6) to the OFF position (o). The indicator light (3) will go out, indicating that the coffee maker is off. € Do not insert the steamer below the mark indicated on the jug. If q 1 MAIN COMPONENTS 1 Cover of the water fill opening 2 Water fill opening 3 ON-OFF indicator light 4 Steamer 5 Removable tray 6 OFF/COFFEE/STEAM selector control 7 Dispenser spoon 8 Filter with dose indicator for 2/4 cups 9 Filter holder 10 Filter holder flap 11 Coffee outlet hole 12 Jug lid 13 Measuring jug for up to 4 cups 14 Filter holder support 15 Power cord 2 USE ZThis appliance has been designed for coffee extraction and for PREPARACIÓN DE CAFÉ 1 Llene el depósito de agua, para ello: desenrosque la tapa (1) girándola en sentido contrario de las agujas del reloj. Coloque de heating milk and other liquids (water, broth, chocolate) using hot steam. ZBefore using the machine with coffee for the first time, we recommend you allow 4-8 cups of water to run through the filter holder. This will fully clean the entire system. € Before cleaning the appliance, make sure it is unplugged from the ZClean the appliance before using it for the first time, immediately ZDo not use foreign objects (pens, screwdrivers, nails, awls, etc. [. . . ] Wait for the steamer to cool down and wipe it with a damp cloth. 2 Every now and again, clean the steamer more thoroughly, as follows: Wait until the steamer cools and unscrew the cylindrical part of the same. Wipe the steamer spindle with a damp cloth and wash the cylindrical part with soap. Make sure that the small hole at the top of the steamer is clean before putting the part back on. [. . . ]