User manual SOLAC CVG9800

[. . . ] Lease never leave the CVG unattended while it is connected to the supply. p · Hildren must be supervised to ensure they do not play with the appliance. [. . . ] O obtain maximum steam, simply press the steam selector button once Fig 2 (i), and the steam icon T will appear in the display at its highest flow. Henyouhavechosentheappropriatetemperatureandsteamflowforthegarment, pressthesteamOnW Off switch Fig 6 (g) once and you may start to iron. It is not necessary to be pushing the steam button continually, just press once and the steam will issue without interruption. To cut off steam output, press the steam On-Off switch Fig 2 (g) again and it will cease to issue automatically. ECO-INTELLIGENT: this Solac Compact Ironing System includes a device for disconnecting the steam function after 3 seconds of not detecting any movement. This ensures lower power consumption as well as greater autonomy of the tank (lower water consumption). The steam function switches back on automatically when the slightest movement of the Compact Ironing System is detected or when any of the steam outlet buttons is pressed. This means that once the device is actuated, the CIS ceases to heat and begins to cool down. At that moment a buzzer will sound and the icon Fig 2 (f) will appear on the blink for 5 seconds on the illuminated display, and it will continue blinking afterwards on the display when it is not lit up Fig 7, indicating that the appliance has been switched off. To switch it back on, just move it slightly or else press any of the three control buttons Fig 2 (g, h, i). Emember that the period between being switched off and switched back on again will affect the time R that the CVG may need to regain the temperature selected previously. We also recommend you to iron first with steam (the level appropriate to the garment you are going to iron) and go over the clothes dry to remove the moisture and obtain results comparable with professional pressing. Keep the steam button pressed to obtain steam during vertical ironing. )and(MAX) the steam is drier and, although the same flow is maintained, it will be harder for you to see. [. . . ] O not clean with abrasive chemical products or solvents as it may attack certain plastic parts and / or D removesomeofthemarksand/orindications. Although the power cord is fitted with a 360º rotational elbow, NEVER FORCE this cord when winding it around the appliance on the first turn. [. . . ]