Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SOLAC ET8942. We hope that this SOLAC ET8942 user guide will be useful to you.
Lastmanuals help download the user guide SOLAC ET8942.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not cover the heating appliance in order to prevent it from overheating. Do not use the heat emitter to dry clothes. The place where the heat emitter is installed must be chosen carefully according to the instructions and in compliance with the standards. [. . . ] 8 Drill the hole into the wall and insert the supplied wall plug (if necessary, remove the heater so that you can work without obstruction, replacing it when you have finished). 9 Fix the bottom mount (3) to the wall using the screws provided (fig. Mount on a plastered brick wall, use the screws and wall plugs provided. Installing the Feet (Accessory - NOT included) If you would like your heater to be free-standing, instead of wall-mounted (fig. 9): 1 Turn the heater over so that the base faces upwards. 2 Place the feet (6) on the support plates. I The holes on each foot must line up with the holes on the support plate. 3 Attach the wing nuts to secure the feet to the support plates. LCD display will light up to show a blue background. All of the display's icons will flash and disappear after a few seconds. 4 Press and hold down the PROG button (9) for two seconds, if you want the heater to operate according to the programmed weekly schedule (fig. The user does not reset the heater, it will operate according to the factory default schedule setting. 5 Press the PROG button (9) once to exit this programming mode and return to the last selected mode (comfort, economy or anti-frost). 3 Press the "+" or "-" buttons again to increase or decrease the temperature as desired for each mode. 5º C every time you press a key. i The degrees centigrade icon will flash while the temperature setting is Being changed and will continue to flash until you have completed the temperature selection. 4 After a few seconds without any button being pressed, the selected temperature will automatically be saved. 5º C (the maximum temperature for this range must always be 3. [. . . ] I The heater will then start to operate according to the saved schedule. The heater must be left plugged into the mains with the programming mode selected, for the selected programme schedule to run. If not, you will need to adjust the day and time. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SOLAC ET8942
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SOLAC ET8942 will begin.
