User manual SOLAC LV1400

[. . . ] ⷠNB: Always unplug the appliance from the mains before refilling the tank and check that the "Comfortsafety" system full indicator (7) is not red before filling the tank. ⷠAlways check that the surfaces, objects and fabrics to be treated are resistant to or compatible with high-temperature steam. We recommend checking the manufacturer's instructions and carrying out a test on a hidden area or a sample. ⷠDo not touch the hot surfaces while using the appliance. [. . . ] Take it to your nearest CLEAN POINT or the waste collection centre closest to your home for processing. You will thus be helping to take care of the environment. We recommend pressing the control (2) repeatedly for short bursts rather than just a few times for longer periods, so as to maintain pressure in the boiler and increase the performance of the steam. ⷠWhen you finish using the steam cleaner, unplug it and wait for it to cool down before removing the accessories. ⷠWe recommend that you empty the water tank if you are not going to use the appliance again. Wait for the steam cleaner to cool down before cleaning it. When the red "Comfortsafety" system full indicator switches off, pour the water out of the tank by tilting the appliance. We recommend that you clean the tank once every fifteen uses. ⷠClean the attachments with soapy water. Insert the taper nozzle (9) and the nozzle with handle in the mouth (3) aligning the lugs of the taper nozzle with the holes in the mouth (3) and turn it clockwise (Fig. Attach these accessories by pushing the taper nozzle (9) or the nozzle with handle (10) as far as they will go onto the flexible pipe (14) or extension pipes (16) using the joint for accessories (17) (only mod. We recommend using the round brush to clean up dirt in between tiles or grease that is stuck to your ceramic hob. If you want to reach inaccessible places or the area to be cleaned is too far away, use the flexible hose. You can add the following accessories to the flexible pipe, on its flat side: round brush (7), angle nozzle (8), taper nozzle (9), fabric accessory (11), window-cleaning accessory (13) and handle (15) (Fig. 6) · But not the extension pipes (16), which connect directly to the handle (15). Attach this accessory to the flexible pipe (14) or, for greater distances, to the extension pipes (16) using the joint for accessories (17) (only mod. To attach it, insert the lugs on the window-cleaning accessory into the hooks in the fabric-cleaning accessory and press downwards until the central lug locks into place and you hear a click. Attach this accessory to the flexible pipe (14) or, for greater distances, to the extension pipes (16) using the joint for accessories (17) (only mod. Main body of the appliance Steam button Accessory base Pilot light Lid of "Comfortsafety" system tank "Comfortsafety" system full indicator. Use this accessory as a joining element between the flexible pipe (14) and the extension pipes (16) when cleaning surfaces located at a greater distance (floors, rugs, carpets, windows, mattresses, etc. ) · This accessory attaches to the flexible pipe (14) by lining up the lugs on the gun with the holes in the mouth of the pipe (14) and turning it clockwise as far as it will go (Fig. If you want to disinfect or clean surfaces that are further away, you can use the extension pipes (16) and the joint for accessories (17). [. . . ] Remember that the water level should not exceed the maximum mark on the beaker. This model is equipped with a shoulder strap, which grants you increased freedom of movement while using it, especially for actions that require using both your hands. ⷠWhen you use the steam cleaner with the shoulder strap, avoid tilting the steam cleaner excessively, since boiling water could come out with the steam. When the steam cleaner has the pressure required to operate, the pilot light (4) will go off indicating that you can start to use it. [. . . ]