User manual SOLAC PV 2010

[. . . ] It is dangerous to use it for any purpose other than the one indicated. € Children must be supervised to ensure they do not play with the appliance. € This appliance is not to be used by persons (or children) whose physical, sensorial or mental capacities are impaired, or who have no experience or knowledge, unless supervised or instructed in the use of the appliance by a person responsible for their safety. € Do not make any modifications or repairs to the appliance. [. . . ] do not use scented water or ironing water either. These products damage the interior of the steam generation system. 1 With the iron unplugged from the mains, rotate the steam selector (10) to the closed position (fig. Fill the water tank without exceeding the maximum level, using the water beaker provided (12) and keeping the iron in the vertical position (Fig. ) When filling the tank, make sure that the water does not overflow from the water filler opening. 3 Check whether the garment to be ironed has a label indicating the ironing temperature. ) We recommend you classify the garments according to their required ironing temperature and begin with the garments ironed on the lowest temperature (•). SYNTHETIC FIBRES, minimum temperature (•) SILK, WOOL, medium temperature (••) COTTON, high temperature (•••) LINEN, MAX temperature , Always make sure the soleplate protector has been removed before starting to , NOTE: Ironing delicate garments at a temperature higher than necessary spoils the fabric and causes burnt residue to stick to the soleplate. 12 MAIN COMPONENTS , If you have any doubts about the temperature to use for a given garment, perform a test on a part, which will not be visible, beginning with the lowest temperature settings. uSE ) This appliance has been designed exclusively for ironing clothes. ) Completely remove all the elements use for transportation and packaging. 1 Turn the temperature selector (9) until it is in the desired position. sTEAM SELECTION depending on the garment to be ironed. The iron has 3 steam positions (dry ironing , medium steam flow , To obtain steam, set the temperature selector (9) between the levels •• and Max, or maximum steam flow USE 13 1 When the pilot light (11) goes out, indicating that the desired temperature has been reached, rotate the steam selector (10) until the desired steam flow is obtained (fig. EMPTYING THE WATER TANK ) When you finish ironing, always empty the water from the tank. 1 Set the steam selector (10) to the closed position and the temperature selector (9) to the 0 position. 2 Unplug the plug from the mains 3 Open the water filler opening (5) and place the iron face down over the sink, gently shaking it to completely empty the tank. 4 Wait until the iron is completely cold and store it in the vertical position in a safe place. IRONING RECOMMENDATIONS STEAM IRONING , For professional ironing results, we recommend you steam iron garments first and then dry iron them. SUPERSTEAM ) If you want more steam while ironing, press the button (8) two or three times, aim the supersteam at the desired area of the garment and pass the iron soleplate over it to dry it. thus is useful for eliminating wrinkles. ) The supersteam may not be released on the first occasions. [. . . ] 14 IRONING RECOMMENDATIONS OTHER FUNCTIONS ANTI-LIMESCALE SYSTEM (only Mod. PV 2010 and PV2210) This iron has an innovative built-in anti-limescale system, consisting of a resin filter that retains the limescale substances from the water, so these cannot reach the steam chamber of the soleplate, thus extending the life of the iron. The existence of this anti-limescale system does not mean that the recommendations about water hardness mentioned in the “BEFORE STARTING TO IRON” section can be ignored. PV2210) The iron incorporates an anti-drip system that prevents the iron from dripping, even when it is switched off. [. . . ]