User manual SOLAC PV1610

[. . . ] Always unplug the appliance after use and before assembling or removing parts, and performing any maintenance or cleaning operations. also unplug it in the case of a power cut. The appliance must be switched off before plugging or unplugging it into the mains · Never pull the cord or use it to hang up the appliance. Always unplug the appliance by pulling the connection pin, and not the cord. [. . . ] Before disposing of your used appliance, you should make it visibly unserviceable and have it disposed of according to current national legislation. Main body Power supply connection cord Metal soleplate Water filling inlet Water tank Steam button 7 8 9 10 11 Temperature selector Steam Selector Heating light Voltage Selector Filling beaker 1 to the proper position using a tool. Make sure you remove the soleplate protector before ironing. Due to high water hardness levels in the mains water supply in most areas, Solac recommends that distilled water should always be used for ironing. This will ensure that that your iron will remain in optimal conditions for a longer period of time. If for any reason demineralised water is not available, be sure to use water with poor mineral qualities (soft) or filter your tap water using a purifying jug. 1 With the iron unplugged from the power supply, move the steam selector (8) to the closed position (fig. Fill the water tank without exceeding the maximum level with the help of the enclosed beaker (11), keeping the iron in a horizontal position (Fig. After filling the container close the lid. Keep the water filing inlet closed during operation. When loading the tank, make sure the water does not overflow into the water filling inlet. ) We recommend that clothes are sorted according to the temperature required for : Ironing delicate garments with a higher temperature than necessary will damage , If you have any doubts about the temperature to use on a particular garment, test a part of the garment that is not visible, starting first with the lowest temperatures. en ) Completely remove all elements used for transport and packaging. N If the unit is hot, handle with caution and avoid touching the metal sole plate. N Never leave the iron in the horizontal position when the soleplate is hot. It must rest on n Be careful with steam, do not direct steam towards people, animals or delicate objects. n Always iron on a stable , firm and smooth surface. ) For very delicate garments, place a cloth between the iron and the delicate garment, to Extend the cord completely and plug the socket into the power supply. Select the desired working temperature according to the garment being ironed (see "TEMPERATURE SELECTION (fig. Select iron with steam ; or without steam , as convenient (see "STEAM SELECTION"). take the iron and slide the sole plate over the fabric to be ironed. When you finish using the iron, move the steam (8) to the closed position and the temperature selector (7) in the min position. [. . . ] Do not clean with harsh chemicals or solvents as they may attack plastic parts and / or eliminate some of the settings and / or indications. 2 Keep your iron in a vertical position, wrap the cable around the heel base and secure the cable with the clip. Although the power cord has a 360º swivel component, NEVER FORCE the cord when starting to wrap it around the product. Solac accepts no liability for faults in your appliance in the event of noncompliance with the specifications of the warranty conditions or failure to follow the operating or maintenance directions included in the instruction brochure for every appliance. [. . . ]